Read Sharp LC-32P70E (serv.man7) Service Manual online
22
LC-26GA5E
LC-32GA5E
LC-26P70E
LC-32P70E
LC-37P70E
21
LC-26GA5E
LC-32GA5E
LC-26P55E
LC-32P55E
LC-37P55E
5.4. PAL Signal & Tuner Adjustment
���������������� ���������������������
��������������������
�
�������
��������
���
��������������������
����������������������
����������
�������������
�����
���
��������������������
����������������������
����������
�������������
�����
�
��������������� �������������������������
�����������
�����������
� �����������������������������������������������������������������������
���������
� ��������������������������������������������
� �������������������������������������������������������������������������
� �������������������������������������������������������������������������
������������������
��������������������������� ���������������������������
������� ���������������
����������������������
���������������������������������
��������
�����������
�����������
�����������������
5.5. ADC Adjustment (Component 15K)
����������������������������������
���������������� ���������������������
��������������������
�
����������
������������������
�������������
������������������������
����������
���� �����������
�������������
������������������������
����������
���� �����������
�
��������������� �������������������������
�����������
�����������
� �������������������������������������������������������������������
���������������������������������
��������������������������������������������������
����������������������������������������
����������������������������������������
���������� �
�����
�
6 White Balance Adjustment
Adjustment procedure Page 7/11 shows the value of adjustment gradation (IN value) and Adjustmnet procedure Page
8/11 & 9/11 show adj. offset value (initial value : 0). White balance adjustment is executed adjusting the adj. offset value,
indicated on Page 8/11 & 9/11.
Condition of the inspection: • Backlight: MAX (+8) [DYNAMIC]
• Colorimeter at screen centre
Adjustment reference device: Minolta CA-210
Adjustment spec. ±0.004, Inspection spec. : ±0.006 (GAMMA 1)
Adjustment spec. ±0.002, Inspection spec. : ±0.004 (GAMMA 2...6)
Adjustment: Check that the values on page 7/11 of process adjustment are set as below. If not, change them accor-
dingly.
Click on the first or last page to see other LC-32P70E (serv.man7) service manuals if exist.