Read Sharp LC-32P55E (serv.man40) Service Manual online
18
LC-26GA5E
LC-32GA5E
LC-26P55E
LC-32P55E
LC-37P55E
The adjustment values are set to their optimum at the factory before shipping. If by any chance a value should become
improper or a readjustment is required due to part replacement, make an adjustment according to the following proce-
dure.
1 Entering and exiting the adjustment process mode
1- Unplug the AC power cord of TV set to force power off.
2- While holding down the “VOL (–)” and “INPUT” keys on the set at once, plug in the AC power cord to turn on the
set. The letter K appears on the screen: “K” color guide:
3- Next, hold down the “VOL (—)” and “P (—)” keys on the set at once. Multiple lines of orange characters appear ing
onscreen indicate that the set is now in the adjustment process mode. If you fail to enter the adjustment process
mode (the display is the same as normal startup), retry the procedure.
4- To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the
power. (When the power is turned off with the remote controller, once unplug the AC power cord and plug it in
again. In this case, wait 10 seconds or so before plugging.)
2 Remote Controller Key Operation and Description of Display in Adjustment Process Mode
2.1 Key operation
Remote controller key
Main unit key
Function
P (Λ / V)
P (Λ / V)
Moving an item (line) by one (UP/DOWN)
VOL (+/-)
VOL (+/-)
Changing a selected item setting (+1/-1)
Cursor (UP / DOWN)
————
Turning a page (PREVIOUS / NEXT)
Cursor (LEFT / RIGHT)
————
Changing a selected line setting (+10/-10)
INPUT SOURCE
on remote controller
INPUT button
Input source switching (toggle switching)
(TV → EXT1 → EXT2 → EXT3 → EXT4 → EXT5)
(Not Operative)
OK
————
Executing a function
Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal
available.
2.2 Description of display
SERVICE ADJUSTMENTS
Caution: Use due care in handling the information described here lest the users should
know how to enter the adjustment process mode. If the settings tampered with in
this mode, unrecoverable system damage may result.
Paramenters
Adjustment process menu
header
Destination
Current color TV system
Currently selected input
Current page title
Current page/ Total pages
1/11 [INFO] TV AUTO FIX: AUTO
MAIN Version
Dev Version
Dev Loader Version
PIC Version
TEMP SENSOR
NORMAL StandBy Cause
ERROR StandBy Cause
LEW05 01.XXX (XXXX/XX/XX X) X
_ _ _ _ _
_ _ _ _ _
XX.XX
XXX
XXXXX
[1] 0 XXHXXM
[2] 0 XXHXXM
[3] 0 XXHXXM
[4] 0 XXHXXM
[5] 0 XXHXXM
Click on the first or last page to see other LC-32P55E (serv.man40) service manuals if exist.