Read Sharp LC-32P50E Handy Guide online
Unit Reset Procedures
Version 1.1
Issue 06/2006
Issue 06/2006
15
SHARP ELECTRONICS (UK) LTD
CE TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
How to set the Factory Presets
Turn off the TV by pressing the power button. Press and hold down RESET and press the
power button on the TV to turn it on.
All setting items (except TV channel) return to the factory pre-setting.
power button on the TV to turn it on.
All setting items (except TV channel) return to the factory pre-setting.
You can run the Auto Installation again by using the following steps.
1.
Turn on the power of the TV.
2.
Press MENU. (Make sure the menu screen displays.)
3.
Press cursor left/right to select “Setup”.
4.
Press cursor up/down to select “Auto Installation”, and then press OK.
5.
Press cursor left/right to select “Yes”, and then press OK.
About RESET and SYSTEM RESET
Press RESET if the TV cannot return to its original state after performing various operations.
• AV Mode resets to USER.
• AV Mode resets to USER.
• Surround resets to Off.
• Analogue TV channel resets to channel 1.
• Image position initialises.
• Audio setting initialises.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and PIN. See page 14 for resetting the PIN
when you know it. See above for initialising to the factory preset values when you forget your
PIN.
Press SYSTEM RESET if the TV does not operate after starting up.
• Pressing RESET will not delete channel preset and PIN. See page 14 for resetting the PIN
when you know it. See above for initialising to the factory preset values when you forget your
PIN.
Press SYSTEM RESET if the TV does not operate after starting up.
Click on the first or last page to see other LC-32P50E service manuals if exist.