Read Sharp LC-32LE700E (serv.man7) Service Manual online
LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
5 – 3
5. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
Page
Line
Item
Description
Remarks (adjustment detail, etc.)
1/17
1
MAIN Version
Main software version
2
BOOT Version
BOOT Version.
3
Monitor Version
Monitor software version
4
T-CON/H.264 Version
T-CON/H.264 Version
5
CPLD Version
CPLD Version.
6
LED T-CON Version
LED T-CON Version
7
EQ DATA CHECKSUM
Audio data checksum.
8
LAMP ERROR
Number of termination due to lamp error.
9
MONITOR ERR CAUSE
Last error standby cause.
10
NORMAL STANDBY CAUSE
Situation that became standby at the end.
(Excluding the error)
(Excluding the error)
11
ERROR STANDBY CAUSE
Error standby cause
2/17
1
INDUSTRY INIT
Enter
Initialization to factory settings execution.
2
INDUSTRY INIT(-Hotel)
OFF
Initialization to factory settings execution.(Hotel mode is
excluded)
excluded)
3
HOTEL MODE
OFF
Hotel mode ON/OFF setting
4
Center Acutime
5H 0M
Main operating hours.
5
RESET
OFF
Main operating hours reset.
6
Backlight Acutime
19H 35M
Backlight operating hours.
7
RESET
OFF
Backlight operating hours reset.
8
LAMP ERROR RESET
OFF
Lamp error reset.
9
ADJ PARAM SET
Enter
ADJ PARAM SET
10
VIC XPOS
0
X-coordinate setting for VIC READ
11
VIC YPOS
0
Y-coordinate setting for VIC READ
12
VIC SIGNAL TYPE
MAIN
Signal type setting for VIC READ
13
VIC READ
OFF
Picture level acquisition function
(Level appears in green on the upper right)
(Level appears in green on the upper right)
3/17
1
RF AGC ADJ
Enter
RF-AGC auto adjustment execution
2
TUNER ADJ
Enter
TUNER auto adjustment execution
3
PAL+TUNER ADJ
Enter
PAL TUNER auto adjustment execution
4
RF AGC
16
RF-AGC auto adjustment execution (CA-8CH)
5
TUNER ADJ(SMPTE)
Enter
TUNER auto adjustment execution (SMPTE)
6
PAL+TUNER ADJ(SMPTE)
Enter
PAL TUNER auto adjustment execution (SMPTE)
TUNER ADJ(SMPTE CH57)
Enter
TUNER auto adjustment execution (SMPTE CH57)
7
PAL+TUNER ADJ(SMPTE CH57)
Enter
PAL TUNER auto adjustment execution (SMPTE CH57)
8
TUNER CONTRAST A_GAIN
14
TUNER signal level adjustment
9
TUNER CONTRAST D_GAIN
2048
TUNER signal level adjustment
10
TUNER CONTRAST OFFSET
256
TUNER signal level adjustment
11
RF AGC READ
OFF
Reading value of RF-AGC voltage
4/17
1
PAL ADJ
Enter
PAL adjustment
2
SECAM ADJ
Enter
SECAM adjustment
3
N358 ADJ
Enter
N358 adjustment
4
PAL CONTRAST A_GAIN
14
PAL contrast adjustment
5
PAL CONTRAST D_GAIN
2048
PAL contrast adjustment
6
PAL CONTRAST OFFSET
256
PAL contrast adjustment
7
SECAM CONTRAST A_GAIN
14
SECAM contrast adjustment
8
SECAM CONTRAST D_GAIN
2048
SECAM contrast adjustment
9
SECAM CONTRAST OFFSET
256
SECAM contrast adjustment
10
N358 CONTRAST A_GAIN
14
N358 contrast adjustment
11
N358 CONTRAST D_GAIN
2048
N358 contrast adjustment
12
N358 CONTRAST OFFSET
256
N358 contrast adjustment
5/17
1
HDMI CEC TEST
Enter
HDMI CEC test
2
INSPECT USB TERM
Enter
Reading inspection of USB memory terminal
3
HDMI EDID WRITE
Enter
HDMI EDID WRITING
4
MONIDATA READ[TEMP/OPC]
OFF
MONITOR Temperature/ OPC Acquisition tool.
5
CAUSE RESET
Enter
Reset of standby cause
Click on the first or last page to see other LC-32LE700E (serv.man7) service manuals if exist.