Read Sharp LC-32LE700E (serv.man14) User Guide / Operation Manual online
11
Quick guide
Checking signal strength and
channel strength (DVB-T/C)
channel strength (DVB-T/C)
If you install a DVB-T/C antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
Press @ and the “MENU” screen
displays.
displays.
Press
c/d to select “Setup”.
Press
a/b to select “Antenna setup-
DIGITAL”, and then press
;.
Checking signal strength
Press
a/b to select “Signal strength”, and
then press
;.
Supply voltage
CH no.
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
1
2
3
3
E
Checking channel strength
Press
a/b to select “Channel strength”, and
then press
;.
You can input a specified frequency band using the 0_9
numeric buttons.
numeric buttons.
Channel strength of DVB-T
Supply voltage
CH no.
Current
Max.
Signal strength
MHz
Signal strength
Channel strength
Current
Max.
Quality
Channel strength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current
Max.
Quality
Position and align the antenna so that
the maximum possible values for “Signal
strength” and “Quality” are obtained.
the maximum possible values for “Signal
strength” and “Quality” are obtained.
NOTE
The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
check the appropriate alignment of the antenna.
E
•
4
•
Inserting the CA card into the CI module
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
CI slot of the TV.
Carefully insert the CI module in
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
1
2
Checking CI module information
Go to “MENU” > “Digital setup” > “CI menu”.
The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Make sure that the CI module is properly inserted.
This menu is only available for digital stations.
This menu is only available for digital stations.
•
•
•
•
LC-LE700E_GB.indd 11
LC-LE700E_GB.indd 11
2009/07/13 14:51:26
2009/07/13 14:51:26
Click on the first or last page to see other LC-32LE700E (serv.man14) service manuals if exist.