Read Sharp LC-32LE600E (serv.man7) Service Manual online
LC-32/40/46LE600E/RU/S
5 – 24
<When EXT5/6/7(HDMI) is used for external input> No picture on the display (5)-2
No HDMI1 digital video output when the EXT6 external input is
used.
Checklist:
1) Is “INPUT SOURCE” button
on the remote control set up correctly?
••• set it as “EXT5”/”EXT6”/”EXT7” with the INPUT SOURCE button on
the remote control.
2) Is MENU-Picture-Backlight/Contrast/Brightness set to “MIN”?
••• Set it to an appropriate level.
3) Check the connection to the external device
••• Connect it correctly as per the operation manual for the device.
4) Attention: The terminal of IC3303 (VCT) cannot be actually checked by hiding oneself, and check it with another terminal of the same line,
please.
Is the HDMI Digital video signal sent to pin (1)-(9) of EXT6 termi-
nal (SC1502)? (HDMI1_D [0:2] _P/N)
NO
Check external connection, input setting, EXT6 terminal
(SC1502) and peripheral circuits.
(SC1502) and peripheral circuits.
YES
Is the HDMI Digital video signal sent to pin (13)-(18) of IC1508
(HDMI-receiver)? (HDMI1_D [0:2] _P/N)
(HDMI-receiver)? (HDMI1_D [0:2] _P/N)
NO
Check short circuit of EXT6 terminal (SC1502), and peripheral
circuits.
circuits.
YES
Is HDMI_SW_ Digital Video signal sent to pin (AF16) (AE16)-
(AF18) (AE18) of input terminal of IC3303 (VCT)?
(HDMI_SW_D [0:2] P/N)
(AF18) (AE18) of input terminal of IC3303 (VCT)?
(HDMI_SW_D [0:2] P/N)
NO
Check short circuit of IC1508 (HDMI_receiver), power source
and peripheral circuits.
and peripheral circuits.
YES
Is the LVDS video signal (LVDS0_D [0:4]
±) input to pins (40)-
(28) of LW Connector (P2601), and is CLK signal (TCLK
±) input
to pins (32)/(33)?
NO
Check whether there is short circuit between [A6:A11], [B6:B11]
pin of IC3303 (VCT) and (40)-(28) pin of LW Connector (P2601),
and peripheral circuits.
pin of IC3303 (VCT) and (40)-(28) pin of LW Connector (P2601),
and peripheral circuits.
YES
Is the I2C signal (VCOM_SDA/SCL) send to pin(12)/(13) of LP
Connector (P2602)?
Connector (P2602)?
NO
Check the I2C signal of IC2602 and peripheral circuit.
YES
Is the PNL12V output to pin (1)/(2) of PL Connector (CN7004(32
inch)/CN7503(40/46 inch)) of POWER UNIT?
inch)/CN7503(40/46 inch)) of POWER UNIT?
NO
Check PL connector of POWER UNIT and U7053(32inch)/
IC7502(40/46inch).
IC7502(40/46inch).
YES
Exchange LCD-CONT-UNIT and do it operate normally?
NO
Check the contact of the LCD-CONT-UNIT connection harness
(LW/LP/PL).
Exchange LCD-PANEL if it is useless even if it exchanges it.
(LW/LP/PL).
Exchange LCD-PANEL if it is useless even if it exchanges it.
Click on the first or last page to see other LC-32LE600E (serv.man7) service manuals if exist.