Read Sharp LC-32LE600E (serv.man13) User Guide / Operation Manual online
25
Connecting a PC
HDMI Connection
PC
HDMI 1, 2 or 3
HDMI-certified cable
PC
HDMI 2*
DVI/HDMI cable
ø 3.5 mm stereo
minijack cable
minijack cable
When using the HDMI 2 terminal, you must select the proper
item in the “PC Audio Select” menu depending on the type of
HDMI cable connected (Refer to page 19 for details).
item in the “PC Audio Select” menu depending on the type of
HDMI cable connected (Refer to page 19 for details).
Analogue Connection
PC
EXT 4*
RGB cable
ø 3.5 mm stereo
minijack cable
minijack cable
PC
EXT 4*
DVI/RGB conversion
cable
cable
ø 3.5 mm stereo
minijack cable
minijack cable
When using the EXT 4 terminal, you must select “EXT 4 (RGB)”
in the “PC Audio Select” menu (Refer to page 19 for details).
in the “PC Audio Select” menu (Refer to page 19 for details).
NOTE
The PC input terminals are DDC1/2B-compatible.
Refer to page 27 for a list of PC signals compatible with the TV.
When connecting to a PC, the input signal type is automatically
detected.
Refer to page 27 for a list of PC signals compatible with the TV.
When connecting to a PC, the input signal type is automatically
detected.
*
*
•
•
•
•
•
Adjusting the PC image
automatically
automatically
This function enables the screen to be automatically
adjusted to its best possible condition when the analogue
terminals of the TV and PC are connected with a
commercially available DVI/RGB conversion cable, etc.
adjusted to its best possible condition when the analogue
terminals of the TV and PC are connected with a
commercially available DVI/RGB conversion cable, etc.
Setup
Auto Sync.
NOTE
“Auto Sync.” may fail if the PC image has low resolution, has
unclear (black) edges, or is moved while executing “Auto
Sync.”.
Be sure to connect the PC to the TV and switch it on before
starting “Auto Sync.”.
“Auto Sync.” can be executed only when inputting analogue
signals through the EXT 4 terminal.
unclear (black) edges, or is moved while executing “Auto
Sync.”.
Be sure to connect the PC to the TV and switch it on before
starting “Auto Sync.”.
“Auto Sync.” can be executed only when inputting analogue
signals through the EXT 4 terminal.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary
to change image position using “Auto Sync.”. In some
cases, however, manual adjustment is needed to
optimise the image.
to change image position using “Auto Sync.”. In some
cases, however, manual adjustment is needed to
optimise the image.
Setup
Fine Sync.
Press
a/b to select the specific adjustment
item.
Press
c/d to adjust the item to the desired
position.
H-Pos.
V-Pos.
Clock
Phase
Clock
Phase
Item
H-Pos.
Centres the image by moving it to the
left or right.
left or right.
V-Pos.
Centres the image by moving it up or
down.
down.
Clock
Adjusts when the image flickers with
vertical stripes.
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image flickers.
contrast or when the image flickers.
NOTE
For resetting all adjustment items to the factory preset values,
press
press
a/b to select “Reset”, and then press ;.
“Clock” and “Phase” in the “Fine Sync.” menu can be adjusted
only when inputting analogue signals through the EXT 4
terminal.
only when inputting analogue signals through the EXT 4
terminal.
•
•
•
1
2
•
•
Connecting a PC
LC-LE600E_GB.indd 25
LC-LE600E_GB.indd 25
2009/07/14 14:39:03
2009/07/14 14:39:03
Click on the first or last page to see other LC-32LE600E (serv.man13) service manuals if exist.