LC-32LE600E (serv.man13) - Sharp TV User Guide / Operation Manual. Page 11

When the TV is powered on for the first time after 
purchase, the initial auto installation wizard appears. 
Follow the menus and make the necessary settings one 
after another.

Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?

E
E
E

Press a on the TV.

The initial auto installation wizard appears.

Setting the OSD language.

English

Português

Press 

a/b to select the desired language, and 

then press 

;.

Selecting the location of the TV.

HOME

STORE

Press 

a/b to select where you will use this TV, 

and then press 

;.

HOME: “STANDARD” will be the default value for the “AV 
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for 
the “AV MODE” setting. If the “AV MODE” is changed, 
the TV will automatically switch back to “DYNAMIC 
(Fixed)” when there is no signal input from the TV or 
remote control unit for 30 minutes.

Setting the country.

Austria

Finland

Press 

a/b to select your country or area, and 

then press 

;.

This setting screen only appears during the first 
installation.

•

•

•

•

Starting channel search.

Start

Skip

Press 

a/b to select “Start” or “Skip”, and then 

press 

;.

If you want to search for more broadcasts, execute 
“Additional Search” from the “Programme Setup” menu 
(Page 21).

The TV searches for, sorts and stores all the 
receivable TV stations according to their 
settings and the connected antenna.

To abort the initial auto installation in progress, press 6.

If you turn off the power on the TV after performing step 5 or 
if you select “Skip” on step 5, the initial auto installation wizard 
will not appear. The auto installation function allows you to 
execute the installation again from the “Setup” menu (Page 20).
The initial auto installation wizard will abort if you leave the TV 
unattended for 10 minutes before searching for channels in 
step 6.
After initial auto installation is completed, the default PIN is 
automatically set to “1234”. To change the PIN setting, refer to 
Password/Parental lock settings

 (Page 22). To clear the PIN 

setting (PIN input will no longer be needed), refer to CLEARING 
THE PIN

 (Page 24).

When “Italy” is selected in the country setting, the default PIN is 
automatically set to “1234” and the default age restriction value 
is set to 18.

If you install an antenna for the first time or relocate it, you 
should adjust the alignment of the antenna to receive a 
good reception while checking the antenna setup screen.

Press @ and the “MENU” screen 
displays.

Press 

c/d to select “Setup”.

Press 

a/b to select “Antenna Setup”, and 

then press 

;.

Press 

a/b to select “Signal Strength”.

The values of “Signal Strength” indicates when to check the 
appropriate alignment of the antenna.

•

•

•

•

•

•

•

LC-LE600E_GB.indd   9

LC-LE600E_GB.indd   9

2009/07/14   14:38:51

2009/07/14   14:38:51