Read Sharp LC-32LE40E (serv.man3) User Guide / Operation Manual online
TV menu
2�
Press <> to select
Decoder and press OK or
≥ to enter available analogue channel list.
3�
Press <> to select the channel to decode.
4�
Press
OK to mark or cancel.
5�
Follow the on-screen instructions to exit.
E
Analogue Ch Fine Tune
You can manually fine tune analogue channels when
reception is poor.
1�
Press
MENU on the remote control and select
TV ≥ Channels.
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block / Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select
Analogue Ch Fine Tune
and press
OK or ≥ to enter the analogue
channel list.
3�
Press <> to select one channel and press
OK
to enter.
4�
Press ≤≥ to adjust the frequency.
5�
When complete, press
OK to set the frequency.
The fine tuned channel is stored under the
current channel number.
6�
Follow the on-screen instructions to exit.
E
Clean Channel List
Select to clean all the channels that stored in the
channel list.
1�
Press
MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block / Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select
Clean Channel List and
press
OK or ≥ to enter.
3�
Select
OK and press OK on the remote control
to clean channel list.
Features
Select menu language
Select the menu display language.
1�
Press
MENU on your remote control and select
Features ≥ Menu language.
2�
Press ≤≥ to select your language.
3�
Follow the on-screen instructions to exit.
E
Channel Edit
Channel edit allows you to change the channel number
or the channel name.
1�
Press
MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block / Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
2�
Press <> to select
Channel Edit and press
OK or ≥ to enter the channel list.
3�
Press <> to select one channel you prefer to
edit.
4�
Press
OK to enter.
5�
Press <> to highlight one of the following:
•
Channel Number: Enter a new channel
number by using the
digit buttons on the
remote control
•
Channel Name: Press the digit buttons on
the remote control to rename the channel.
Please refer to the graphic below for available
characters. (Press each button repeatedly to
change between characters.)
0-9 digit buttons with available characters
ABC1
DEF2
GHI3
JKL4
MNO5
PQR6
STU7
VWX8
+-.0
YZ9
6�
Follow the on-screen instructions to exit.
NOTE
• The new channel number you have entered can not
override the exist one.
E
Assign a channel decoder (For ATV)
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decoded. Before selecting channels,
make sure your TV is connected to SCART.
1�
Press
MENU on the remote control and select
TV ≥ Channels�
NOTE
• You are prompted to enter current password to enter
Channels if Channel Block / Parental Guidance /
Input Block in the Parental menu is not the default
setting.
Input Block in the Parental menu is not the default
setting.
16
Click on the first or last page to see other LC-32LE40E (serv.man3) service manuals if exist.