Read Sharp LC-32LE210EB (serv.man7) Service Manual online
22
LC-32LE210
LC-32LE220
LC-32LE220
6. Video Signal Adjustment Procedure
6.1. RGB SCART ADC
1. Enter in Service mode.
2. Press “
ź” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “
ź” until selecting “ADJUST” option.
6. Press “
Ź”until selecting “Internal Signal”.
7. Press “
Ÿ”until selecting “MODE” option.
8. Press “
Ź”until selecting “RGB”.
9. Press “
ź” until selecting “AUTO ADC” option.
10. Press “
Ź”, the adjustment starts.
11. “SUCCESS” appears when the adjustments nish.
12. Exit of Service mode.
6.2. COMPONENTS ADC
1. Enter in Service mode.
2. Press “
ź” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “
ź” until selecting “ADJUST” option.
6. Press “
Ź”until selecting “Internal Signal”.
7. Press “
Ÿ”until selecting “MODE” option.
8. Press “
Ź”until selecting “YPbPr(SD)” or “YPbPr(HD)”
9. Press “
ź” until selecting “AUTO ADC” option.
10. Press “
Ź”, the adjustment starts.
11. “SUCCESS” appears when the adjustments nish.
Note: both SD and HD are adjusted.
12. Exit of Service mode.
6.3. PC IN RGB ADC
1. Enter in Service mode.
2. Press “
ź” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears.
5. Press “
ź” until selecting “ADJUST” option.
6. Press “
Ź”until selecting “Internal Signal”.
7. Press “
Ÿ”until selecting “MODE” option.
8. Press “
Ź”until selecting “PC-RGB”.
9. Press “
ź” until selecting “AUTO ADC” option.
10. Press “
Ź”, the adjustment starts.
11. “SUCCESS” appears when the adjustments nish.
12. Exit of Service mode.
Click on the first or last page to see other LC-32LE210EB (serv.man7) service manuals if exist.