LC-32LE210E (serv.man22) - Sharp TV User Guide / Operation Manual. Page 29

• 

 has not been created as a real recording 

method, so the recorded data will be deleted each time 
you cancel it, change programme or input source, or 
switch off the TV. The recorded data will never be available 
for any external device.

• 

During  TimeShift mode, 

p, “EPG” and m show live 

broadcast information, not recorded one.

• 

Keeping “ALWAYS” mode as a permanent option

 

may 

shorten the life of the external USB memory.

• 

Programmes which require a PIN to watch them cannot be 
recorded with TimeShift function until you enter the PIN. 

USB REC can activate immediately recording by using 
REC

 on the remote control, or with a timer using data 

taken from EPG or programming an event manually. To 
use either method follow the instructions below:

● 

● 

The recording starts when user decides:

 

Press REC on the remote control to start recording 
the current programme. REC symbol appears in 
the bottom left corner of the screen.

 

To stop recording the current programme, press 
END

 twice, change TV programme or input source, 

or switch- off the TV set.

 

Press 

/

 to playback the programme being 

recorded. The TV set continues recording the 
broadcast while you are watching the recorded 
programme. The TV set shows 

I

 symbol on the 

screen. 

 

Press 

/

 during playback to pause. The TV shows 

the symbol 

F

 on the screen.

 

Press 

V

 playback to fast forward. By pressing 

V

 key repeatedly, allows you to select the fast 

forward. By pressing 

L

 key the recording fast 

forwards in intervals of fi ve minutes. Press 

/

 to 

restore the normal speed.

 

Press 

S

 during playback to rewind. By pressing 

S

 key repeatedly, allows you to select the rewind 

speed. By pressing 

T 

key the recording rewinds 

in intervals of five minutes. Press 

/

 to restore the 

normal speed.

Press  END during playback mode to stop the 
playback and return to recording mode of current 
programme. The TV set continues recording and 
the REC symbol is shown on the screen.

While the recording is activated the REC symbol, the 
recording progress bar or playback progress bar will be 
displayed.

The bar shows the recording start time, current time 
and expected end, and the remaining recording time.

                                                                                

 

••••••••••

••••••••••••••••••••••••••••••••••••••••••   



REC

[hhhh:mm:ss]

● 

● 

It can be programmed a recording by using two 
methods. Using the programme guide (EPG) or manually 
with the option “USB REC Manual Temporization” 
on the menu TIME.

1 Programming a timer with the EPG

1. Press EPG to select the programme you want to 

record. Then press REC.

2.  Set up the recording parameters (auto, once, every 

day or weekly) and press OK to confi rm.

2 Programming with “USB REC Manual 

1. To activate a timer recording use the menu 

option  TIME and the option USB REC Manual 
Temporization

.

2.  Set up the desired recording parameters (channel, 

mode, date, start time and end) and press OK.

● 

● 

The timings will be stored in the USB REC 
Programmed Recording List

 in the TIME 

menu, pending to be executed.