Read Sharp LC-32LE144E (serv.man3) User Guide / Operation Manual online
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of the same rating as above, which is also indicated on the pin face of the plug, must be
used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover
fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied,
cut off the mains plug and fit an appropriate type.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover
fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied,
cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and
disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 3A socket outlet, as
a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and
disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 3A socket outlet, as
a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-
pin plug.
Before replacing the plug cover make sure that:
pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
392.9
45
750
698.4
478
286
508
408
100
54
EXT 3
COMPONENT
AV INPUT
EXT 2
HDMI 1
DIGITAL
AUDIO
OUTPUT
EXT 1
SCART
SCART
ANT
PC
L-AUDIO-R
PB(CB)
Y
PR(CR)
C.I.
USB
HDMI 2
OUTPUT
A
A
B
/
AUDIO (L/R)
CAUTION
Use a Product with the
following thickness for
optimal connection to
HDMI cable / USB device.
following thickness for
optimal connection to
HDMI cable / USB device.
HDMI : A 12mm
USB : A 10mm
B 7mm
P
MENU
92
222
100
LE144E_244E_Cover_EN_Rev1.indd 3
LE144E_244E_Cover_EN_Rev1.indd 3
9/20/2012 3:40:53 PM
9/20/2012 3:40:53 PM
Click on the first or last page to see other LC-32LE144E (serv.man3) service manuals if exist.