LC-32GD9EK (serv.man37) - Sharp TV User Guide / Operation Manual. Page 19

Allow you to use a PIN to protect certain settings from
being accidentally changed.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Child Lock”, and then press
OK.

New PIN

–

–

–

Reconfirm

–

–

–

–

–

Change PIN

Reset

Enter the 4-digit number as a PIN using 0 – 9.

Enter the same 4-digit number as in step 4 to
confirm.

• “The system PIN has been changed successfully”

displays.

• To view a locked channel, you must enter a PIN. (See

pages 16 and 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.

You can assign each input source a label you like.

Press b to select the desired input source.

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Input Label”, and then press
OK.

Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.

Repeat step 5 above until the name is fully spelt
out, and then press OK.

• The name can be 6 characters or less.
• If a label name is less than 6 characters, select

“END”, then press OK.

• You cannot change the label if the input source is TV or

DTV.

Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.

H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical

stripes.

Phase: Adjusts when characters have low contrast or

when the image flickers.

• If you need to adjust the image position, adjust the position

using your PC.

An individual programme can be erased.

Repeat steps 1 to 4 in Programme Setup.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want
to erase, and then press OK.

• A message screen pops up.

Press c/d to select “Yes”, and then press OK to
erase the selected programme. All the subsequent
programmes move up.

Repeat steps 3 and 4 until all desired channels
are erased.

Allow you to reset your PIN to the factory preset “1234”.

Repeat steps 1 to 3 in Changing the PIN.

Enter the PIN.

Press a/b to select “Reset”, and then press OK.

Press c/d to select “Yes”, and then press OK.

• As a precautionary measure, make a note of your PIN