Read Sharp LC-32GA5E (serv.man7) Service Manual online
7
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA5E
LC-32GA5E
LC-32GA5E
REMOVING OF MAJOR PARTS
.%)#'
LC-26GA5E
REMOVING OF MAJOR PARTS
REMOVING OF MAJOR PARTS
Removing the stand
Before attaching/detaching stand.
ሩBefore performing work make sure to turn off the TV.
ሩBefore performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged.
ሩBefore performing work make sure to turn off the TV.
ሩBefore performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged.
Removing 1 screws. Removing 2 screws.
Removing 3 screws.
Removing 2 screws.
Removing 3 screws.
Removing 4 screws.
Stand
Removing the Center Angle.
Take off the center angle by removing 4 screws and disconnecting.
Removing 2 screws.
Removing 4 screws.
Center Angle
Removing 2 screws.
8
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA5E
LC-32GA5E
LC-32GA5E
.%)#'
Removing the PWB UNIT.
1. Removing the INVERTER PWB UNIT.
1) Right end connectors for lamps are removed.
2) The connector PG concluded with the power supply unit is removed.
3) Four screws of
1) Right end connectors for lamps are removed.
2) The connector PG concluded with the power supply unit is removed.
3) Four screws of
ແ are removed.
2. Removing the INVERTER-GND PWB UNIT.
1) Left end connectors for lamps are removed.
2) Three screws of
1) Left end connectors for lamps are removed.
2) Three screws of
ໂ are removed.
3. Removing the LCD CONTROLLER PWB UNIT.
1) Two connectors of
1) Two connectors of
ໃ are removed.
2) Six screws of
ໄ are removed.
4. Removing the POWER PWB UNIT.
1) The connector PG concluded with the inverter unit is removed.
2) Four screws of
1) The connector PG concluded with the inverter unit is removed.
2) Four screws of
are removed.
5. Removing the MAIN PWB UNIT and COMPONENT INPUT PWB UNIT.
Eight screws of
Eight screws of
ໆ are removed.
6. Removing the CONTROL PWB UNIT.
웵wo screws of are removed.
7. Removing the R/C-LED PWB UNIT.
One screws of
One screws of
່ are removed.
8. Removing the Speaker UNIT.
1)A speaker relay connector is removed from a cabinet and it dissociates
2) It draws out perpendicularly then.
1)A speaker relay connector is removed from a cabinet and it dissociates
2) It draws out perpendicularly then.
POWER PWB UNIT
INVERTER PWB UNIT
LCD CONTROLLER PWB UNIT
R/C, LED PWB UNIT
COMPONENT INPUT
PWB UNIT
MAIN PWB UNIT
INVERTER-GND PWB UNIT
CONTROL PWB UNIT
SPEAKER UNIT
Speaker relay connector.
Ԙ
ԙ
Ԛ
ԛ
Ԝ
ԝ
Ԟ
ԟ
9
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA5E
LC-32GA5E
LC-32GA5E
.%)#'
LC-32GA5E
REMOVING OF MAJOR PARTS
REMOVING OF MAJOR PARTS
Removing the stand
Before attaching/detaching stand.
ሩBefore performing work make sure to turn off the TV.
ሩBefore performing work make sure to turn off the TV.
Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged.
Removing 1 screws.
Removing 4 screws.
Removing 2 screws.
Removing 2 screws.
Removing 2 screws.
Removing 2 screws.
Removing 3 screws.
Removing 3 screws.
Stand
Removing 4 screws.
Removing the Center Angle.
Take off the center angle by removing 7 screws and disconnecting.
Removing 2 screws.
Center Angle
Removing 5 screws.
10
LC-26GA5E
LC-32GA5E
LC-32GA5E
LC-26GA5E
LC-32GA5E
LC-32GA5E
.%)#'
Removing the PWB UNIT.
1. Removing the INVERTER-A PWB UNIT.
1) Right end connectors for lamps are removed.
2) The connector (CN7501, CN7502) concluded with the power supply unit is removed.
3) Four screws of
1) Right end connectors for lamps are removed.
2) The connector (CN7501, CN7502) concluded with the power supply unit is removed.
3) Four screws of
ແ are removed.
2. Removing the INVERTER-B PWB UNIT.
1) Right end connectors for lamps are removed.
2) The connector (CN7401) concluded with the INVERTER-A unit is removed.
3) Four screws of
1) Right end connectors for lamps are removed.
2) The connector (CN7401) concluded with the INVERTER-A unit is removed.
3) Four screws of
ໂ are removed.
3. Removing the INVERTER-GND PWB UNIT.
1) Left end connectors for lamps are removed.
2) Six screws of
1) Left end connectors for lamps are removed.
2) Six screws of
ໃ are removed.
4. Removing the LCD CONTROLLER PWB UNIT.
1) Two connectors of
1) Two connectors of
ໄ are removed.
2) Six screws of
are removed.
5. Removing the POWER PWB UNIT.
1) The connector PG concluded with the inverter unit is removed.
2) Four screws of
1) The connector PG concluded with the inverter unit is removed.
2) Four screws of
ໆ are removed.
6. Removing the MAIN PWB UNIT and COMPONENT INPUT PWB UNIT.
Eight screws of
Eight screws of
are removed.
7. Removing the CONTROL PWB UNIT.
웵wo screws of ່ are removed.
8. Removing the R/C-LED PWB UNIT.
One screws of
One screws of
້ are removed.
9. Removing the Speaker UNIT.
1)A speaker relay connector is removed from a cabinet and it dissociates
2) It draws out perpendicularly then.
1)A speaker relay connector is removed from a cabinet and it dissociates
2) It draws out perpendicularly then.
219'429$70+6
+08'46'4#
29$70+6
.%&%10641..'429$70+6
4%.'&29$70+6
%1/210'06+027629$
70+6
/#+029$70+6
+08'46'4)0&29$70+6
%10641.29$70+6
52'#-'470+6
5RGCMGTTGNC[
V
Ԙ
Ԛ
ԛ
Ԝ
ԝ
Ԟ
ԟ
Ԡ
+08'46'4#
29$70+6
ԙ