Read Sharp LC-32GA4E (serv.man6) User Guide / Operation Manual online
24
Basic adjustment settings
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
want to edit, and then press OK.
• The selected channel information displays.
Press a/b to select “Skip”, and then press
OK.
OK.
• Skip menu displays.
1
2
Press a/b to set “Skip” to “On”, and then
press OK.
press OK.
Setting the decoder
When connecting a decoder to the unit, you need to
assign the terminal input.
assign the terminal input.
Press a/b/c/d to select the channel you
want to edit, and then press OK.
want to edit, and then press OK.
• The selected channel information displays.
1
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
want to edit, and then press OK.
• The selected channel information displays.
Press a/b to select “Lock”, and then press
OK.
OK.
• Child lock menu displays.
1
2
NOTE
• See page 47 for setting PIN.
• When “Lock” is set to “On” for a channel, “Child lock has
• When “Lock” is set to “On” for a channel, “Child lock has
been activated.” displays , and the image and sound of
the channel are blocked.
the channel are blocked.
• When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
PIN lifts the child lock temporarily until the power is turned
off.
Setting the child lock
You can block the viewing of any channel.
Press a/b to set “Lock” to “On”, and then
press OK.
press OK.
NOTE
• “Off” is factory preset value.
• “INPUT1” is the recommended selection.
• “INPUT1” is the recommended selection.
Channels with “Skip” set to “On” are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
using Pr/Ps even if selected while watching the
image from the TV.
3
Press a/b to set “Decoder” to “INPUT1”,
“INPUT2, or “INPUT3” and then press OK.
“INPUT2, or “INPUT3” and then press OK.
Manual setting for each channel (continued)
Skipping channels
Press a/b to select “Decoder”, and then
press OK.
press OK.
• Terminal inputs information displays.
(Off, INPUT1, INPUT2, INPUT3)
2
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
want to edit, and then press OK.
Press a/b to select “Booster”, and then
press OK.
press OK.
• Booster menu displays.
1
2
Setting the booster
Picture quality may improve in regions with weak signal
strength using this function.
strength using this function.
Press a/b to set “Booster” to “On”, and then
press OK.
press OK.
NOTE
• If signal strength is strong enough for the selected
channel, the effect is negligible and may produce
instability. In such case, select “Off”.
instability. In such case, select “Off”.
LC-32GA4E(E)-d
04.5.30, 9:10 AM
24
Click on the first or last page to see other LC-32GA4E (serv.man6) service manuals if exist.