Read Sharp LC-32GA3E (serv.man13) Service Manual online
DESCRIPTION OF SCHEMATIC DIAGRAM
VOLTAGE MEASUREMENT CONDITION:
1. When the exclusive-use AC adapter is used, the colour
bar signal of colour bar generator for service is input to
get the normal screen. When the audio is minimized,
the voltage value is measured with the 20 k
get the normal screen. When the audio is minimized,
the voltage value is measured with the 20 k
Ω/V tester.
WAVEFORM MEASUREMENT CONDITION:
1. When the exclusive-use AC adapter is used, the colour
density, lightness and colour hue are set to the center
position, and the signal of colour bar generator for
service is observed to get waveform.
position, and the signal of colour bar generator for
service is observed to get waveform.
INDICATION OF RESISTOR & CAPACITOR:
RESISTOR
1. The unit of resistance “
1. The unit of resistance “
Ω” is omitted.
(K=k
Ω=1000 Ω, M=MΩ).
2. All resistors are ± 5%, unless otherwise noted.
(J= ± 5%, F= ± 1%, D= ± 0.5%)
3. All resistors are Carbon type, unless otherwise noted.
C
: Solid
W
: Cement
S
: Oxide Film
T
: Special
N
: Metal Coating
CAPACITOR
1. All capacitors are mF, unless otherwise noted.
1. All capacitors are mF, unless otherwise noted.
(P=pF=mmF).
2. All capacitors are Ceramic type, unless otherwise
noted.
(ML) : Mylar
(ML) : Mylar
(TA) : Tantalum
(PF) : Polypro Film
(ST) : Styrol
CAUTION:
This circuit diagram is original one, therefore there may be a
slight difference from yours.
slight difference from yours.
IMPORTANT SAFETY NOTICE:
PARTS MARKED WITH “
å” ( )ARE
IMPORTANT FOR MAINTAINING THE SAFETY OF
THE SET. BE SURE TO REPLACE THESE PARTS
WITH SPECIFIED ONES FOR MAINTAINING THE
SAFETY AND PERFORMANCE OF THE SET.
THE SET. BE SURE TO REPLACE THESE PARTS
WITH SPECIFIED ONES FOR MAINTAINING THE
SAFETY AND PERFORMANCE OF THE SET.
D1
D2
DESCRIPTION OF SCHEMATIC DIAGRAM …………………………………………………… D2
AV Unit ……………………………………………………………………………………… D3
∼ D12
KEY Unit …………………………………………………………………………………………… D13
R/C, LED Unit ……………………………………………………………………………………… D14
FRONT Unit …………………………………………………………………………………D15
∼ D16
LCD CONTROL Unit ………………………………………………………………………D17
∼ D32
CPU Unit ……………………………………………………………………………………D33
∼ D42
MAIN Unit ……………………………………………………………………………………D43
∼ D70
DVI Unit ………………………………………………………………………………………D71
∼ D74
POWER Unit …………………………………………………………………………………D75
∼ D76
INVERTER-A Unit (LC-32GA3E) …………………………………………………………D77
∼ D78
INVERTER-B Unit (LC-32GA3E) …………………………………………………………D79
∼ D80
INVERTER GROUND-A Unit (LC-32GA3E) …………………………………………………… D81
INVERTER GROUND-B Unit (LC-32GA3E) …………………………………………………… D82
INVERTER-A Unit (LC-37GA3E) …………………………………………………………D83
∼ D84
INVERTER-B Unit (LC-37GA3E) …………………………………………………………D85
∼ D86
INVERTER GROUND-A Unit (LC-37GA3E) …………………………………………………… D87
INVERTER GROUND-B Unit (LC-37GA3E) …………………………………………………… D88
EXT, SP, TERMINAL Unit ………………………………………………………………………… D89
SCHEMATIC DIAGRAM
Models
LC-32GA3E
LC-37GA3E
LC-37GA3E
CONTENTS
Page
Display