Read Sharp LC-32DH57E (serv.man4) Service Manual online
LC-32DH57E-BK/RU-BK/S-BK
3 – 5
8. Adjustment procedure
1. Inch Setting
2. COMB-BIAS Adjustment
Adjustment point
Adjustment conditions
Adjustment procedure
1
Inch Setting
Adjustment process mode
Adjustment process
“INCH SIZE” menu page 1/7
“INCH SIZE” menu page 1/7
1) Inch Setting with adjustment process mode.
2) Enter the adjustment process mode, refering to the 2nd item.
3) By using P (
2) Enter the adjustment process mode, refering to the 2nd item.
3) By using P (
/
) key of R/C, Move the cursor to “INCH SIZE” on page 1/
7.
4) Select inch size 32 with the Volume (+)/(-) key of remote control.
5) Press the “OK” key of remote control.
6) After a while, If “*** OK ***” is displayed, the setting is completed.
5) Press the “OK” key of remote control.
6) After a while, If “*** OK ***” is displayed, the setting is completed.
Adjustment point
Adjustment conditions
Adjustment procedure
1
COM-BIAS Adjustment
A visual check
Adjustment process
“COM BIAS” menu page 7/7
“COM BIAS” menu page 7/7
1) COM-BIAS Adjustment with adjustment process mode.
2) Enter to the adjustment process mode, refering to the 2nd item.
3) By using
2) Enter to the adjustment process mode, refering to the 2nd item.
3) By using
/
key and P (
/
) key of R/C, Move the cursor to “COM-
BIAS” on page 7/7.
4) Press the “OK” key. then, you can check that the pattern for adjustment is
displayed.
5) Adjust so that the flicker for the central part of a screen becomes the mini-
mum using the volume (+)/(-) key of R/C.
6) In order to exit from this process, press the “OK” key of remote control again.
Click on the first or last page to see other LC-32DH57E (serv.man4) service manuals if exist.