LC-32DH510EB - Sharp TV Service Manual (repair manual). Page 7

1. Adjustment method after PWB and/or IC replacement due to repair  

 

 

 

 

 

 

 

 

 

 

 

   The unit is set to the optimum at the time of shipment from the factory.   

 

 

 

 

 

                

   If any value should become improper or any adjustment is necessary due to the part replacement, make an adjust-

ment 

according 

to 

the 

following 

procedure. 

         

 

 

 

 

 

 

  MAIN 

UNIT 

 

DUNTKF261FMxx   

 

 

 

 

 

NOTE: [Caution when replacing ICs in the main unit (IC1901, IC1902, IC1006 and IC1007)] 

 

 

Before replacing the relevant part, procure the following parts in which the data have been rewritten. 

 

 

   

 

   

 

 

 

 

Ref.

Description

Parts code IC + data

Description new IC code for service

IC1901

HDMI EDID 1

RH-IXD041WJZZY

VHIM24C02W61EY AND DATA LC32DH500E_HDMI_1_EDID

IC1902

HDMI EDID 2

RH-IXD042WJZZY

VHIM24C02W61EY AND DATA LC32DH500E_HDMI_2_EDID

IC1006

HDCP USER SETTINGS

RH-IXD043WJZZY

RH-IXC986WJZZY AND DATA LC32DH500E_HDCP_KEY

IC1007

FLASH MEMORY

RH-IXD216WJZZY

RH-IXD012WJZZY AND LC32DH510EB_MERGE_V1.0

 

1. By key-unit.

 

1. Unplug the AC power cord. 
2. Press and hold “V-” and “b” keys, simultaneously, and then plug the AC power cord. 
3. “K” appears on the screen. 
4. Press and hold “V-” and “P-” keys, simultaneously. 
5. “SHARP FACTORY MENU” appears (see Figure 1).
6. Unplug the AC power cord to exit of adjustments process. 

2. By own R/C

1. Turn on the TV set. 

2. Press “b”,”2”,”5”, “8”, “0” (the time is limited to 5 sec. approx., to enter this code). 

3. “SHARP FACTORY MENU” appears (see Figure 1).  

4. Press “OK” on lines 5 ~ 12 to go to submenu. 

5. Press “MENU” to return to main menu. 

6. Press “END” to exit of adjustments mode.