LC-32D44E (serv.man11) - Sharp TV User Guide / Operation Manual. Page 10

Read Sharp LC-32D44E (serv.man11) User Guide / Operation Manual online

Quick guide
Turning on the power
Press 
a on the TV or B on the remote control unit.
Standby mode
Press 
B on the remote control unit when the TV is 
on.
•  The TV enters standby mode and the image on the screen 
disappears.
• The 
B indicator on the TV changes from green to red.
•  To completely turn off the power to the TV, unplug the AC 
cord from the AC outlet. However, do not unplug the AC 
cord unless otherwise instructed.
Display status indicator
Off
Power off.
Red
The TV is in standby mode.
Green
The TV is on.
NOTE
•  If you are not going to use this TV for a long period of time, 
be sure to remove the AC cord from the power outlet.
•  Weak electric power is still consumed even when 
a is 
turned off.
•  In DTV input mode, if the power is turned off immediately 
after a setting change from the menu screen, the new 
setting or channel information may not be memorised.
Initial auto installation (Analogue)
When the TV powers on for the first time after 
purchase, the initial auto installation (Analogue) is 
invoked. You can automatically set language, country 
and channels in successive operations.
NOTE
•  The initial auto installation functions only once. If the initial 
auto installation is not completed (ex: When menu screen 
disappeared by not operating for a few minutes, when the 
power shut down, etc.), try Auto Installation from the Setup 
menu. (See page 15.)
•  The initial auto installation stops by pressing RETURN.
Setting the on-screen display language
1 Press a/b/c/d to select the desired language 
listed on the screen. 
2 Press OK to enter the setting.
Setting the country or area 
1 Press a/b/c/d to select your country or area 
listed on the screen. 
2 Press OK to enter the setting.
•  The programme auto search starts at the same time.
After this setting, auto search starts with the following 
order:
1 Programme auto search 
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the auto search.
The setup menu disappears and you can watch the 
programme on channel 1.
1
2
Using the analogue programme list
You can also select the desired channel from 
programme list instead of using 0-9 numeric buttons or 
P (
r/s).
Press OK when no other menu screen is 
displayed. (Except external input.)
Press 
a/b to select the desired channel to 
tune in, and then press OK.
Press END to exit the Programme List.
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme. 
It is much more than a simple replacement for existing 
analogue television transmission. DVB provides more 
stations, clearer picture quality and other services 
displayed on the screen. It also allows a range of new 
features and services including subtitles and multiple 
audio tracks.
To watch DTV broadcasts, follow the procedures below 
to scan all available services in your area.
Press DTV or 
b to access the DTV mode.
Press DTV MENU and the DTV Menu screen 
displays.
Press 
c/d to select “Installation”. 
Press 
a/b to select “Auto Installation”, and 
then press OK
 
If you have already set the PIN, enter it here. If 
not, enter the factory preset PIN “1234”.
•  See page 17 for setting PIN.
•  A confirmation message displays. Press 
c/d to 
select “Yes”, and then press OK to start the search.
The TV starts scanning all available DTV and 
radio services in your area.
NOTE
•  The language and country settings used in this operation 
are the settings you have already set while executing 
the  Initial auto installation (Analogue). If you want to 
reconfigure the country setting, for instance after moving 
to another country, conduct “Auto Installation” from the 
Analogue Menu again.
•  The services are stored according to the channel number 
information embedded in the stream (if available). If 
the information is not available, the services are stored 
according to the order in which they were received.
  If you would like to sort the order, it is possible to arrange it 
as explained in page 24.
•  To cancel the scan in progress, press END.
•  You cannot select any DTV-related menu items unless 
“Auto Installation” has been completed.
1
2
3
1
2
3
4
5
 8
LC-32D44E-gb.indd   8
LC-32D44E-gb.indd   8
2008/02/21   9:44:34
2008/02/21   9:44:34
Page of 40
Display

Click on the first or last page to see other LC-32D44E (serv.man11) service manuals if exist.