Read Sharp LC-32D12E (serv.man3) User Guide / Operation Manual online
English - 10 -
S/PDIF Coaxial Out
5.
outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
RF Input
RF Input
6.
connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input
7.
is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
HDMI 1: HDMI Input
HDMI 1: HDMI Input
8.
HDMI 2: HDMI Input
9.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels
1.
that you subscribe to. For more information, see “Conditional Access” section.
Side USB input
Side USB input
2.
Headphone jack is used for connecting an external headphone to the system.
3.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Video Input is used for connecting video signals of external devices.Connect the
Video Input is used for connecting video signals of external devices.Connect the
4.
video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
Audio Inputs are used for connecting audio signals of external devices. Connect the
your device.
Audio Inputs are used for connecting audio signals of external devices. Connect the
5.
audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on
your device.
your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
6.
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
6.
, switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
•
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
•
00_MB61_[GB]_3902UK_IDTV_SILVER11_32883W_(power save mode)_10070377_50177411.indd 10
00_MB61_[GB]_3902UK_IDTV_SILVER11_32883W_(power save mode)_10070377_50177411.indd 10
04.10.2010 14:31:44
04.10.2010 14:31:44
Click on the first or last page to see other LC-32D12E (serv.man3) service manuals if exist.