Read Sharp LC-32AD5E (serv.man3) User Guide / Operation Manual online
GB
-3
Quick guide
Attaching the stand (LC-26AD5E, LC-26AD5S, LC-32AD5E, LC-32AD5S)
Before performing work spread cushioning over the base area to lay the TV on, making sure the area is
completely flat. This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1
Confirm the 8 screws supplied with the TV.
Short screws (
X
4)
(used in step 2)
Long screws (
X
4)
(used in step 3)
2
Remove the covering sheet before use.
Set the post for the stand unit onto the box.
2
Attach the base to the post.
3
Attach the base to the 4 screws into the 4 holes on
the bottom of the base.
NOTE
• To detach the stand, perform the step in reverse order.
Hex key
Screw
Soft cushion
3
Insert the stand into the openings on the bottom of
the TV.
2
Insert and tighten the 4 screws into the 4 holes on
the rear of the TV.
Setting the TV
Removing the covering sheet
For protection, sheets , and are covering the product. Please remove these sheets before use.
( : LC-20AD5E, LC-20AD5S Black models only / : Black models only)
For protection, sheets , and are covering the product. Please remove these sheets before use.
( : LC-20AD5E, LC-20AD5S Black models only / : Black models only)
Remove each sheet.
Tear from the cut point and
remove the sheet by peeling it
back to either side.
remove the sheet by peeling it
back to either side.
There is a protective fi lm
covering the face of the
remote control. Please
remove this fi lm before
use.
covering the face of the
remote control. Please
remove this fi lm before
use.
Hex key
Screw
32A0101A_Eng.indd 3
32A0101A_Eng.indd 3
2007/04/19 23:14:38
2007/04/19 23:14:38
Click on the first or last page to see other LC-32AD5E (serv.man3) service manuals if exist.