LC-32AD5E (serv.man3) - Sharp TV User Guide / Operation Manual. Page 17

GB  

Sleep  timer
DNR
No  signal  off
No  operation  off
Blue  screen
Rec  screen  status
Reset  TV  setting

Option

If there is no signal input for 
8 minutes, the TV enters the 
standby mode. 
Even if you start using the 
PC and the signal inputs 
again, the TV stays in 
standby mode.
The TV turns on again by 
pressing   on the TV or 

 

on the remote control unit. 
(See page 8.)

•

•

•

You can set “Sleep timer” to 
automatically turn off the LCD 
TV set.

Produce a clearer image.

You can set the power to 
automatically turn off if there 
is no signal for 5 minutes.

When set to “On” the TV 
will automatically enter 
the standby mode if no 
operations are performed for 
3 hours.

Five minutes before the TV 
enters standby mode, the 
remaining time displays 
every minute.

•

You can set the TV to 
automatically change to a 
blue screen and mute the 
sound if the signal is weak or 
absent when TV is TV mode.

This function determines 
whether the TV screen switches 
on or not when a programmed 
timer setting begins.

If you select “Yes”, the TV 
turns off. All parameters 
settings are reset to the 
factory settings and tuning 
data will be lost.

*

1

  This item is visible only when TV is PC mode.

*

2

  The status display appears by pressing SLEEP.

*

3

  If you have defi ned a PIN on the “Child lock” screen, the 

PIN input screen is displayed. Input the four-digit PIN 
(

0–9) fi rst. (See page 16.)

Menu Operation: A (page 12)
The WSS signal has 4:3 auto-switching that allows 
you to select between Normal and Panorama.

Normal range keeping 4:3 or 16:9 aspect 
ratio

Wide image without side bars

32A0101A_Eng.indd   17

32A0101A_Eng.indd   17

2007/04/26   2:06:21

2007/04/26   2:06:21