LC-30HV4E (serv.man7). Removing of major parts - Sharp TV Service Manual (repair manual). Page 2

7. Remove the system/control terminal retaining:

7-1. Remove the four hex head screws securing the terminals of the system and control cables (white).
7-2. Remove the two screws securing the terminal of the system cable (gray).
7-3. Remove the rear chassis retaining screw.

8. Remove the PC I/F and SR units:

8-1. Remove the four PC I/F unit shield retaining screws and remove the shield.
8-2. Remove the six PC I/F unit retaining screws and remove the I/F unit.
8-3. Remove the two PC I/F unit angle retaining screws and remove the angle.
8-4. Remove the two SR unit retaining screws and remove the SR unit.

9. Remove the rear chassis:

9-1. Remove the two tuner nuts and washers.
9-1. Remove the 13 rear chassis retaining screws and remove the rear chassis.

10. Remove the three power supply board retaining screws and remove the power supply board.

8-1

8-2

8-3

8-4

7-1

7-3

7-2

PC I/F unit shield

PC I/F unit

PC I/F unit angle

SR unit

Rear chassis

9-2

9-1

10

Power unit