LC-30HV4E (serv.man40). Useful adjustment settings - Sharp TV User Guide / Operation Manual. Page 3

Read Sharp LC-30HV4E (serv.man40) User Guide / Operation Manual online

49
Useful adjustment settings
1
Auto Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
Press  MENU and the PC MENU screen
displays.
Press c/d to select “Yes”, and then press
ENTER.
• Auto Sync. starts and “Adjusting the image”
displays.
PC MENU
Setup
Auto Sync.
No
Yes
NOTE
• When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (ex. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the AVC System and switch
it on before starting Auto Sync.
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
Press  MENU and the PC MENU screen
displays.
Press c/d to select “Setup”.
• If password is already set, you are asked to
enter it. Follow the same step as explained in
“Language setting for on-screen display (PC
input mode)”. (See step 2 on page 29.)
Press a/b to select “Fine Sync.”, and then
press ENTER.
Press a/b to select the specific
adjustment item.
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
Description
Centres the image by moving it to the left or
right.
Centres the image by moving it to the up or
down.
Adjusts the clock frequency.
Adjusts the clock phase.
Selected item
H-Pos.
V-Pos.
Clock
Phase
PC MENU
Setup
Fine Sync.
Reset
H-Pos.
[0]
–90
+90
V-Pos.
Clock
Phase
[0]
[0]
[0]
–60
–90
–20
+60
+90
+20
30%
1
2
4
3
5
4
3
2
Press c/d to select “Setup”.
• Setup menu displays.
Press a/b to select “Auto Sync.”, and then
press ENTER.
Page of 14
Display

Click on the first or last page to see other LC-30HV4E (serv.man40) service manuals if exist.