Read Sharp LC-30HV2E (serv.man18) User Guide / Operation Manual online
35
Basic adjustment settings
Power control
Power Control setting allows you to reduce the display brightness to save energy.
A
• When setting to “Auto”, make sure no object obstructs
• When setting to “Auto”, make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
surrounding light.
• “Standard” is factory preset value.
• Return to the previous menu by pressing RETURN.
• Return to the previous menu by pressing RETURN.
ENTER
MENU
/
Power control for AV source
Power save
When set to “Save1”, “Save2” or “Auto”, power
consumption is reduced by decreasing picture
brightness.
When set to “Save1”, “Save2” or “Auto”, power
consumption is reduced by decreasing picture
brightness.
1
Press MENU.
2
Press a/b to select “Power control”, and then
press ENTER.
press ENTER.
3
Press a/b to select “Power Save”, and then press
ENTER.
ENTER.
4
Press a/b to select the desired mode, and then
press ENTER.
press ENTER.
5
Press MENU to exit the menu.
Description
• The screen darkens slightly to
conserve power consumption.
• The screen darkens more significantly
to conserve power consumption.
• Screen brightness adjusts according
to the ambient light of the room to
conserve power consumption.
conserve power consumption.
Selected item
Save1
Save2
AUTO
MENU
Power control
Power Save
[Save1]
Standard
Save1
Save2
Auto
MENU
Power control
No Signal off
[Enable]
Disable
Enable
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU.
2
Press a/b to select “Power control”, and then
press ENTER.
press ENTER.
3
Press a/b to select “No Signal off”, and then press
ENTER.
ENTER.
4
Press a/b to select “Enable”, and then press
ENTER.
ENTER.
5
Press MENU to exit the menu.
• Five minutes before the power shuts down, a hazard
warning will display every minute.
A
• “Disable” is factory preset value.
• Return to the previous menu by pressing RETURN.
• When a TV programme finishes, and the AVC System
• “Disable” is factory preset value.
• Return to the previous menu by pressing RETURN.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
Click on the first or last page to see other LC-30HV2E (serv.man18) service manuals if exist.