Read Sharp LC-28HM2E (serv.man15) User Guide / Operation Manual online
9
GB
Preparation
Connecting the Display and AVC System
Use the supplied system cable.
1
Remove the back cover of the display.
• Press both of your thumbs upwards against
• Press both of your thumbs upwards against
the two claws on lower side of the cover (
✩)
and pull away the cover.
2
Remove the system cable cover.
3
1 Insert the system cable connectors into the
display input terminal on the display and the
out put terminal on the AVC system until
they click.
out put terminal on the AVC system until
they click.
2 Connect the AC power cords to the AC
power inputs on the display and the AVC
system.
system.
• After connecting the various cables, fasten
them using the provided cable clamps as
shown in the diagram below before mounting
the cover.
shown in the diagram below before mounting
the cover.
Hold this tab and slide the
cover downward.
cover downward.
2
Removing the system
cable cover
cable cover
3
-
1
3
-
2
3
-
2
6
3
-
1
Pass over the pins
Supplied
cable clamp
e.g. Cables from
the optional
speakers
the optional
speakers
Rear view
Preparation
Click on the first or last page to see other LC-28HM2E (serv.man15) service manuals if exist.