Read Sharp LC-26SB25E (serv.man2) User Guide / Operation Manual online
tV menu
Fine tune analogue channels
You can manually fine tune analogue channels when
reception is poor�
reception is poor�
Press
1�
menu on the remote control and select
installation > Channel installation > analogue:
manual installation > Fine tune.
manual installation > Fine tune.
Press
2�
≥ to enter the
Fine tune menu.
Press
3�
< or > to adjust the frequency.
Press
4�
≤ when done.
Select
5�
Store current channel to store the fine
tuned channel under the current channel number.
Press
6�
≥ to enter.
Press
7�
oK. Done appears.
Press
8�
menu to exit.
rearrange channels
Press
1�
menu on the remote control and select
installation > Channel installation > rearrange.
Press
2�
≥ to enter the
rearrange list.
Press
3�
< or > in the
rearrange list to select the
channel you want to rearrange.
Press the yellow button to move the channel
4�
up the list, or press the blue button to move the
channel down the list.
channel down the list.
Press
5�
menu to exit.
rename channels
Press
1�
menu on the remote control and select
installation > Channel installation > rearrange.
Press
2�
≥ to enter the
rearrange list.
Press
3�
< or > in the
rearrange list to select the
channel you want to rename.
Press the red button. (
4�
rename)
Press
5�
≤ and ≥ to select characters or < and >
to change the characters. Space, numbers (0-9)
and other special characters are located between
z and a.
and other special characters are located between
z and a.
Press the green button or
6�
oK to finish.
note
Delete all characters by pressing the yellow button� Delete
•
only the highlighted character by pressing the blue button�
uninstall or reinstall channels
You can uninstall a stored channel or reinstall an
uninstalled channel�
uninstalled channel�
Press
1�
menu on the remote control and select
installation > Channel installation > rearrange.
Press
2�
≥ to enter the
rearrange list.
Press
3�
< or > to select the channel you want to
uninstall or reinstall.
Press the green button to uninstall or reinstall the
4�
channel.
Press
5�
menu to exit.
test digital reception
If using digital broadcasts, you can check the quality and
signal strength of digital channels� This allows you to
reposition and test your antenna or satellite dish�
signal strength of digital channels� This allows you to
reposition and test your antenna or satellite dish�
Press
1�
menu on the remote control and select
installation > Channel installation > Digital:
test reception.
test reception.
Press
2�
oK.
Press the green button to automatically start
3�
the test or manually enter the frequency of the
channel you want to test. If the signal quality
and strength is poor, reposition the antenna or
satellite dish and retest.
channel you want to test. If the signal quality
and strength is poor, reposition the antenna or
satellite dish and retest.
When complete, press the yellow button to store
4�
the frequency.
Press the red button to return to the
5�
Channel
installation menu.
Press
6�
menu to exit.
note
If you have further problems with the reception of your
•
digital broadcast, contact a specialised installer�
Clear program list
You can erase the program list�
Press
1�
menu on the remote control and select
installation > Channel installation > Clear
program list.
program list.
Press
2�
menu to exit.
24
Click on the first or last page to see other LC-26SB25E (serv.man2) service manuals if exist.