LC-26P50E (serv.man24) - Sharp TV User Guide / Operation Manual. Page 10

Press a on the TV.

• The B indicator on the TV changes from red to green.

• If you are not going to use this TV for a long period of

time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when a is

turned off.

When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can
automatically set language, country and channels in
successive operations.

Setting the on-screen display language

1 Press a/b/c/d to select the desired language

listed on the screen.

2 Press OK to enter the setting.

Setting the country or area

1 Press  a/b/c/d to select your country or area

listed on the screen.

2 Press OK to enter the setting.
• The programme auto search starts at the same time.

After this setting, auto search starts with the following
order.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

You do not need to do anything during the auto search.

The setup menu disappears and you can watch the
programme on channel 1.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 12.)

• The initial auto installation stops by pressing RETURN.

Press B on the remote control unit.

• The TV enters standby mode and the image on the screen

disappears.

• The B indicator on the TV changes from green to red.

Press a on the TV.

• The B indicator on the TV gradually turns off.
• When the TV is turned off by a, you cannot turn on the

power by pressing B on the remote control unit.

Off

Red

Green

Power off

The TV is in standby mode.

The TV is on.

Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.

• Refer to operation manuals of each external equipment

for the details.

• Only works when the audiovisual equipment is connected

to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.

• The use of the AV Link function is only possible if the TV-

set has enforced a complete auto-installation with the
connected audiovisual equipment (page 8, Initial auto
installation).
The availability of the AV Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.

This TV incorporates four typical AV Link functions for
smooth connections between the TV and other
audiovisual equipment.

While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).

When the connected audiovisual equipment (e.g. VCR,
DVD) enters standby mode, so does the TV.

When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.

LC-26P50E_GB_a

05.7.27, 6:32 AM

8