Read Sharp LC-26LE320E (serv.man2) User Guide / Operation Manual online
tV menu
Press
1�
menu on the remote control and select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Decoder and press oK or
≥ to enter available analogue channel list.
Press
3�
<> to select the channel to decode.
Press
4�
oK to mark or cancel.
Follow the on-screen instructions to exit.
5�
analogue Ch Fine tune
E
You can manually fine tune analogue channels when
reception is poor.
Press
1�
menu on the remote control and select
tV ≥ Channels.
note
You are prompted to enter current password to enter
•
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
analogue Ch Fine tune
and press
oK or ≥ to enter the analogue
channel list.
Press
3�
<> to select one channel and press
oK
to enter.
Press
4�
≤≥ to adjust the frequency.
When complete, press
5�
oK to set the frequency.
The fine tuned channel is stored under the
current channel number.
Follow the on-screen instructions to exit.
6�
Clean Channel list
E
Select to clean all the channels that stored in the
channel list.
Press
1�
menu on the remote control and select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Clean Channel list and
press
oK or ≥ to enter.
Select
3�
oK and press oK on the remote control
to clean channel list.
Channel edit
E
Channel edit allows you to change the channel number
or the channel name.
Press
1�
menu on the remote control and select
tV ≥ Channels�
note
You are prompted to enter current password to enter
•
Channels if Channel Block /parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
Press
2�
<> to select
Channel edit and press
oK or ≥ to enter the channel list.
Press
3�
<> to select one channel you prefer to
edit.
Press
4�
oK to enter.
Press
5�
<> to highlight one of the following:
Channel number:
•
Enter a new channel
number by using the
digit buttons on the
remote control
Channel name:
Channel name:
•
Press the
digit buttons on
the remote control to rename the channel.
Please refer to the graphic below for available
characters. (Press each button repeatedly to
change between characters.)
0-9 digit buttons with available characters
ABC1
DEF2
GHI3
JKL4
MNO5
PQR6
STU7
VWX8
+-.0
YZ9
Frequency:
•
Use
digit buttons on the remote
control to enter the frequency. (Only for
analogue channels).
Colour System:
Colour System:
•
Press ≤≥ to select the colour
system. (Only for analogue channels)
Sound System:
Sound System:
•
Press ≤≥ to select the sound
system. (Only for analogue channels)
Follow the on-screen instructions to exit.
6�
note
The new channel number you have entered can not
•
override the exist one.
assign a channel decoder (For atV)
E
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decoded. Before selecting channels,
make sure your TV is connected to SCART.
16
Click on the first or last page to see other LC-26LE320E (serv.man2) service manuals if exist.