Read Sharp LC-26GA5E (serv.man3) User Guide / Operation Manual online
10
Menu operations
E
ADVANCED
The “ADVANCED” menu consists of the advanced
feature items for the picture adjustments.
feature items for the picture adjustments.
NOTE
• “ADVANCED” items cannot be set when the FM radio
mode is selected.
✔ COMB FILTER
Menu Operation: PICTURE Group A (page 9)
Set to “ON” to reduce the colour interference in picture
with fine details and the picture gets sharper.
with fine details and the picture gets sharper.
✔NOISE RED. (NOISE REDUCTION)
Menu Operation: PICTURE Group A (page 9)
Select your desired item from the three items of “OFF”,
“HIGH”, or “LOW” to reduce the noise when receiving
a weak signal. “NOISE RED.” provides high quality
images with minimal dot crawl and cross colour noise.
“HIGH”, or “LOW” to reduce the noise when receiving
a weak signal. “NOISE RED.” provides high quality
images with minimal dot crawl and cross colour noise.
✔ DYN. CONTRAST
(DYNAMIC CONTRAST)
Menu Operation: PICTURE Group A (page 9)
Set to “ON” to increase the contrast on the soft parts
of the picture.
of the picture.
✔ MONOCHROME
Menu Operation: PICTURE Group A (page 9)
For viewing a video in monochrome.
✔ I/P SETUP
Menu Operation: PICTURE Group A (page 9)
Adjusting the image and input signal can give you a
more beautiful picture.
more beautiful picture.
INTERLACE: Use this setting when you cannot get
a clear picture with Progressive. (Especially
suitable for media with special effects like game
software.)
suitable for media with special effects like game
software.)
PROGRESSIVE: Normally, you should select this
setting.
✔ COLOUR TEMP.
(COLOUR TEMPERATURE)
Menu Operation: PICTURE Group A (page 9)
Adjusts the colour temperature to give the best white
image.
image.
✔ NTSC HUE
Menu Operation: PICTURE Group A (page 9)
To adjust the skin colour during NTSC signal reception.
✔ MOV. COMP.
(MOVEMENT COMPENSATION)
Menu Operation: PICTURE Group A (page 9)
The “MOV. COMP.” smoothes the quick jumps
(movements) of images on the screen, in order to avoid
artifacts.
(movements) of images on the screen, in order to avoid
artifacts.
✔ DYN. GAMMA (DYNAMIC GAMMA)
Menu Operation: PICTURE Group A (page 9)
Set to “ON” to increase the brightness on the dark
parts of the picture
parts of the picture
✔ BACKLIGHT
Menu Operation: PICTURE Group A (page 9)
To adjust your desired screen brightness.
HIGH: White with bluish tone
•
•
•
LOW: White with reddish tone
•
•
•
LOW: White with reddish tone
Item
Item
c Button
d Button
NTSC HUE
Skin tones become
purplish
purplish
Skin tones become
greenish
greenish
Item
c Button
d Button
BACKLIGHT
The screen dims
The screen
brightens
brightens
Item
LC-26/32/37GA5E(E)_b
04.11.30, 8:26 AM
10
Click on the first or last page to see other LC-26GA5E (serv.man3) service manuals if exist.