LC-24DV250K (serv.man5) - Sharp TV User Guide / Operation Manual. Page 25

English   - 24 -

1.  Press on the power button
2.  Please insert a disc to the loader.
The disc will be automatically loaded and play 
commences if the disc does not have any menus 
recorded on it.
A menu may appear on the TV screen after a few 
moments or the fi lm may start immediately after the 
introduction of the Film Company. This behaviour 
depends on the disc content and may change.

3.  Press  “

” / “

” /   /   or the number button 

(s) to select the preferred title.

4.  Press OK.
Play of the selected items now starts. The played 
item may be a motion picture, a still picture or another 
submenu depending on the disc.

1.  No sound will be heard during Rapid advance 

or Rapid reverse.

2.  No sound will be heard during Slow motion play.
3.  Reverse slow motion play is not available.
4.  In some cases, the subtitle language is not 

changed immediately to the selected one.

5.  When the preferred language is not selected even 

after pressing the button several times, it means 
that the language is not available on the disc.

6.  When the player is restarted or the disc is 

changed, the subtitle selection is automatically 
changed back to the initial settings. 

7.  If a language is selected, not supported by the 

disc, the subtitle language will automatically be 
set to the disc’s priority language.

8.  Usually a circulation will happen while switching 

to another language, that is you can cancel 
the subtitle by pressing this button a number of 
times until “Subtitle Off” appears on the screen.

9.  When the power is turned on or the disc is 

removed, the language heard is the one 
selected at the initial settings. If this language 
is not recorded on the disc, only the available 
language on the disc will be heard.

10.  Some DVDs may not contain root and/or title 

menus.

11.  Reverse stepping is not available.
12.  For your convenience:
If you attempt to enter a number greater than the total 
time of the current title, the time search box disappears 

and “

 Input Invalid” message appears on up-left 

corner of screen.
13.  Slide Show is disabled when the ZOOM mode 

is on.

The picture quality is poor (DVD)
• Make sure the DVD disc surface is not damaged. 

(Scratch, fi ngerprint etc.)

• Clean the DVD disc and try again. 

• Ensure that the DVD disc is in the drawer with the 

label uppermost.

• A damp DVD disc or condensation may effect the 

equipment. Wait for 1 to 2 hours in Stand-by to dry 
the equipment.

Disc does not play
•   No disc in the machine. Place a disc into the loader.
• Disc incorrectly loaded.

• Wrong type of disc. The machine cannot play CD-

ROMS etc.• The region code of the DVD must match 
the player.

Wrong OSD language
• Select the language in the set-up menu.
• The language for the sound or subtitles on a DVD 

cannot be changed.

• Multilingual sound and/or subtitles not recorded on 

the DVD.

• Try to change the sound or subtitles using DVD’s 

title menu. Some DVD’s do not allow the user to 
change these settings without using the disc’s menu

• These functions are not available on the DVD.
No picture
•  Have you pressed the correct buttons on the remote 

control? Try once more.

No sound
• Check the volume is set to an audible level.
• Make sure you have not switched the sound off 

accidentally.

Distorted sound
• Check that the appropriate listening mode setting 

is correct.

If you have tried the above solutions and none seem to work, 
try switching your TV-DVD off and on again. If this does not 
work, contact your supplier or TV-DVD repair technician. 
Never attempt to repair a defective TV-DVD yourself.

01_[GB]_MB95S_4847UK_DVBT_C_24205LED_DVD_ROCKER_SILVER16_10081848_50232563_basic IB.indd   24

01_[GB]_MB95S_4847UK_DVBT_C_24205LED_DVD_ROCKER_SILVER16_10081848_50232563_basic IB.indd   24

27.08.2013   13:36:15

27.08.2013   13:36:15