Read Sharp LC-22LE430E (serv.man2) User Guide / Operation Manual online
tV menu
E
assign a channel decoder (For atV)
Decoders that decode channels can be connected
to SCART. You have to assign the TV channel as a
channel to be decoded. Before selecting channels,
make sure your TV is connected to SCART.
1�
Press
menu on the remote control and select
tV ≥ Channels�
note
• You are prompted to enter current password to enter
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
2�
Press <> to select
Decoder and press oK or
≥ to enter available analogue channel list.
3�
Press <> to select the channel to decode.
4�
Press
oK to mark or cancel.
5�
Follow the on-screen instructions to exit.
E
analogue Ch Fine tune
You can manually fine tune analogue channels when
reception is poor.
1�
Press
menu on the remote control and select
tV ≥ Channels.
note
• You are prompted to enter current password to enter
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
2�
Press <> to select
analogue Ch Fine tune
and press
oK or ≥ to enter the analogue
channel list.
3�
Press <> to select one channel and press
oK
to enter.
4�
Press ≤≥ to adjust the frequency.
5�
When complete, press
oK to set the frequency.
The fine tuned channel is stored under the
current channel number.
6�
Follow the on-screen instructions to exit.
E
Clean Channel list
Select to clean all the channels that stored in the
channel list.
1�
Press
menu on the remote control and select
tV ≥ Channels�
note
• You are prompted to enter current password to enter
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
2�
Press <> to select
Clean Channel list and
press
oK or ≥ to enter.
3�
Select
oK and press oK on the remote control
to clean channel list.
4�
Press <> to select another channel and press
oK to mark. The second channel your marked
would move to the front of the first channel you
selected.
5�
Repeat step 3 to 4 to reorder more channels.
6�
Follow the on-screen instructions to exit.
E
Channel edit
Channel edit allows you to change the channel number
or the channel name.
1�
Press
menu on the remote control and select
tV ≥ Channels�
note
• You are prompted to enter current password to enter
Channels if Channel Block / parental Guidance /
input Block in the parental menu is not the default
setting.
input Block in the parental menu is not the default
setting.
2�
Press <> to select
Channel edit and press
oK or ≥ to enter the channel list.
3�
Press <> to select one channel you prefer to
edit.
4�
Press
oK to enter.
5�
Press <> to highlight one of the following:
•
Channel number: Enter a new channel
number by using the
digit buttons on the
remote control
•
Channel name: Press the digit buttons on
the remote control to rename the channel.
Please refer to the graphic below for available
characters. (Press each button repeatedly to
change between characters.)
0-9 digit buttons with available characters
ABC1
DEF2
GHI3
JKL4
MNO5
PQR6
STU7
VWX8
+-.0
YZ9
6�
Follow the on-screen instructions to exit.
note
• The new channel number you have entered can not
override the exist one.
16
Click on the first or last page to see other LC-22LE430E (serv.man2) service manuals if exist.