Read Sharp LC-22LE320E (serv.man2) User Guide / Operation Manual online
Film mode:
·
Automatically detects a film-
based source (originally encoded at 24 or
25 frames per second, depending on the
vertical frequency), analyses it and then
recreates each still film frame for high-
definition picture quality.
[effect] — MJC effect selection. Set the
effect from
low / middle / High, or set to off
to disable this function.
Press
4�
≤≥ to select / adjust the item to the
desired level.
Follow the on-screen instructions to exit.
5�
use smart picture
Apart from manually adjusting picture settings, you
can use
Smart picture to set your TV to a predefined
picture setting.
Press
1�
menu on the remote control and select
picture.
Press
2�
oK or ≥ to enter picture and select
Smart picture�
Press
3�
≤≥ to select one of the following
settings:
personal
•
Standard
•
Vivid
•
movie
•
eco
•
Follow the on-screen instructions to exit.
4�
Sound
adjust sound settings
This section describes how to adjust sound settings.
Press
1�
menu on the remote control and select
Sound.
Press
2�
oK or ≥ to enter the list.
Menu
Equalizer 120Hz
Equalizer 500Hz
Equalizer 1.5KHz
Equalizer 5KHz
Equalizer 10KHz
Balance
Virtual Surround
Equalizer 500Hz
Equalizer 1.5KHz
Equalizer 5KHz
Equalizer 10KHz
Balance
Virtual Surround
3
3
2
4
5
3
2
4
5
Off
AVL
0
Off
Digital Audio Out
PCM
Select
Sound
Picture
TV
Eco
Exit
EXIT
Enter
OK
Features
Parental
Personal
Sound Mode
Press
2�
oK or ≥ to enter the list.
Menu
Select
Brightness
Contrast
Colour
Colour
Tint
Sharpness
Colour Temperature
Advanced Control
Sharpness
Colour Temperature
Advanced Control
50
50
50
50
0
5
5
Cool
Sound
Picture
TV
Eco
Exit
EXIT
Enter
OK
Standard
Smart Picture
Features
Parental
Press
3�
o> to select one of the following
settings:
Brightness:
•
Changes the level of light in the
picture.
Contrast:
Contrast:
•
Changes the level of bright parts in
the picture keeping the dark parts unchanged.
Colour:
Colour:
•
Changes the level of saturation.
tint:
•
Changes the colours to reddish or bluish.
Sharpness:
•
Changes the level of sharpness of
fine details.
Colour temperature:
Colour temperature:
•
Sets the colour
temperature to
Cool (bluer), normal
(balanced),
Warm (redder).
advanced Control:
•
Press
oK or ≥ to enter
and press <> to select one of the following
item:
noise reduction:
*
Filters and reduces the
noise in the picture. Selects the level to
low
/
medium / High / auto. Or select off to
disable this function.
Flesh tone:
Flesh tone:
*
Selects
on to set the flesh
colour to be more natural.
Back light:
Back light:
*
Adjusts the background brighter
or darker. (Only if the DCR is off.)
DCr (Dynamic contrast ratio):
DCr (Dynamic contrast ratio):
*
Enhances
the contrast in the picture as the image on
the screen changes. Press ≤≥ to switch
active control
on or off.
advanced (only for 32”/37”/42”):
*
[mode] — MJC (Motion Judder Compensation)
mode selection. Set 100Hz to let TV display
on 100Hz frame rate. Set Film Mode to
decrease picture judder in film play.
100Hz:
·
“100 Hz” technology provides
superior solutions for digital display picture
quality removing motion blur.
note
note
This effect is greater on fast moving images.
−
100 Hz will have no effect in the following
−
cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
If images appear blurred, set the
If images appear blurred, set the
−
100 Hz
to
off.
tV menu
12
Click on the first or last page to see other LC-22LE320E (serv.man2) service manuals if exist.