Read Sharp LC-22LE22E Service Manual online
AZAD2102B provide a Vibration-Spectrum modulation clock for PWM Output. This
vibration frequency is around 10KHZ shift (+/- 5KHZ of Fpwm).
vibration frequency is around 10KHZ shift (+/- 5KHZ of Fpwm).
The advantage of the small size package (WCSP) makes AZAD2102B very suitable for
mobile phone and PDA device application. And the Class-D amplifier structure let
AZAD2102B to have highly efficiency power consumption than Class-AB amplifier.
AZAD2102B can shrink the application board, reduce system cost, and external
components.
mobile phone and PDA device application. And the Class-D amplifier structure let
AZAD2102B to have highly efficiency power consumption than Class-AB amplifier.
AZAD2102B can shrink the application board, reduce system cost, and external
components.
ESD level protection I/O embedded in AZAD2102B. For general applications, doesn’t
need to add extra ESD protection device (like Varistors) in application system for
AZAD2102B’s I/O.
need to add extra ESD protection device (like Varistors) in application system for
AZAD2102B’s I/O.
4.2. Features
CMOS Technology
High Efficiency 85%
High PSRR 70dB at 217Hz
Differential OP-amp Input
AZAD2102B provides Vibration-Spectrum Modulation clock for reduce EMI
Provide Mute function(set Mute_B to GND will go into Mute status)
For the input stage AZAD2102B built-in a 10Kohm resistors (Gain setting=29.5dB)
Maximum Battery Life and Minimum Heat
Efficiency With an 8-Ω Speaker:
3.5 mA Quiescent Current
Output Power at 10% THD
2.85Watts at AVdd=DVdd=5.0Volt, Rload=4Ω
1.45Watts at AVdd=DVdd=3.6Volt, Rload=4Ω
0.30Watts at AVdd=DVdd=3.0Volt, Rload=4Ω
1.75Watts at AVdd=DVdd=5.5Volt, Rload=8Ω
0.87Watts at AVdd=DVdd=3.6Volt, Rload=8Ω
0.41Watts at AVdd=DVdd=3.0Volt, Rload=8Ω
Eliminate Power on and Power-off “Pop” noise
A Fewer External Components
Optimized PWM Output Stage Eliminates LC Output Filter
Internally generate 290 kHz Switching Frequency to eliminate Capacitor and
Resistor
Improve PSRR (–70 dB) and Wide Supply Voltage (3.0 V to 5.5 V)
Fully Differential Design Reduces RF Rectification
This chip has been built-in a very strong ESD protection.
System level ESD 4KV (IEC 61000-4-2 ESD Contact Level)
Wafer Chip Scale Package (WCSP)
TSSOP Package with Exposed Pad
Click on the first or last page to see other LC-22LE22E service manuals if exist.