Read Sharp LC-22DV240K (serv.man3) User Guide / Operation Manual online
English - 27 -
Sound Mode: You can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
or Dual II mode, only if the selected channel supports
that mode.
AVL: Automatic Volume Limiting (AVL) function sets the
sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Headphone/Lineout:
When you connect an external
amplifier to your TV using the headphone jack,
you can select this option as
you can select this option as
Lineout. If
you have
connected headphones to the TV, set this option as
Headphone.
Headphone.
Dynamic Bass: Dynamic Bass is used to increase
bass effect of the TV set.
bass effect of the TV set.
Digital Out: Sets digital out audio type.
Confi guring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
personal preferences.
Press “MENU” button and select Settings ikon by
using “ ” or “ ” button. Press OK button to view
Settings menu.
using “ ” or “ ” button. Press OK button to view
Settings menu.
Operating Settings Menu Items
Press “
•
” or “
” button to highlight a menu item.
Press
•
OK button to select an item.
Press
•
“MENU” button to exit.
Settings Menu Items
Conditional Access: Controls conditional access
modules when available.
modules when available.
Language: Confi gures language settings.
Parental: Confi gures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Sources: Enables or disables selected source
options.
options.
Other Settings: Displays other setting options of
the TV set.
the TV set.
Using a Conditional Access
Module
Module
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
when the TV is SWITCHED OFF.
In order to watch certain digital channels, a conditional
•
access module (CAM) can be necessary. This module
must be inserted in the CI slot of your TV.
must be inserted in the CI slot of your TV.
Obtain the Conditional Access Module (CAM) and
•
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
company, then insert those to the TV using the
following procedure.
Insert the CAM and then the viewing card to the
•
slot that is located in the terminal cover at the rear
side of the TV.
side of the TV.
The CAM should be correctly inserted, it is
•
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
and then wait for few moments until the card is
activated.
When no module is inserted, “
•
No Common
Interface module detected” message appears on
the screen.
the screen.
Refer to the module instruction manual for details
•
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
the service provider.
Press “MENU” button and select the icon by using
“ ” or “ ” button. Press OK button to view Settings
menu. Use “
“ ” or “ ” button. Press OK button to view Settings
menu. Use “
” or “
” button to highlight Conditional
Access and press OK to view menu items.
00_MB62_[GB]_(01-TV)_1910UK_UK IDTV_PVR_BRONZE19_22942LED_ROCKER_10076197_50202411.indd 27
00_MB62_[GB]_(01-TV)_1910UK_UK IDTV_PVR_BRONZE19_22942LED_ROCKER_10076197_50202411.indd 27
05.03.2012 12:01:12
05.03.2012 12:01:12
Click on the first or last page to see other LC-22DV240K (serv.man3) service manuals if exist.