Read Sharp LC-22D12E Service Manual online
Receiving Channel (Digital, Center frequency):
VHF Low CH. E2 ~ S10 ( 50.5MHz ~ 170.5MHz )
VHF High CH. E5 ~ S41 ( 177.5MHz ~ 466 MHz )
UHF CH. E21 ~ E69 ( 474 MHz ~ 858 MHz )
VHF High CH. E5 ~ S41 ( 177.5MHz ~ 466 MHz )
UHF CH. E21 ~ E69 ( 474 MHz ~ 858 MHz )
Receiving Channel (PAL, Picture carrier frequency):
VHF Low CH. E2 ~ S10 ( 48.25MHz ~ 168.25MHz )
VHF High CH. E5 ~ S41 ( 175.25MHz ~ 463.25MHz )
UHF CH. E21 ~ E70 ( 471.25MHz ~ 863.25MHz )
VHF High CH. E5 ~ S41 ( 175.25MHz ~ 463.25MHz )
UHF CH. E21 ~ E70 ( 471.25MHz ~ 863.25MHz )
Intermediate Frequency:
Digital(center) DVB-T (36.167 MHz)
Digital(center) DVB-C (36.125 MHz)
Analog(picture) 38.9 MHz
Digital(center) DVB-C (36.125 MHz)
Analog(picture) 38.9 MHz
Input Impedance: 75Ω, Unbalanced
Band Change-Over System
PLL Control System
Tuning System
Electronic Tuning System With PLL
Internal(or External) RF AGC function
Built in wideband AGC detector with 6 programmable take-over points
1.3. Pinning:
Pin no.
Terminal
Name
Name
Pin Description
1
Ant Power
Active Antenna Power
2
B+
+5V, Supply Voltage (Preamplifier, DC/DC)
3
RF AGC
RF AGC (internal or external mode)
4
CL
I2C Serial Clock
5
DA
I2C Serial Clock
6
BP
+5V, Supply Voltage (RF Amp, PLL, IF Amp)
7
BT(T.P)
+33V, within DC/DC circuit
8
AS
I2C Address Selection of the PLL
9
IF AGC
Control voltage for the IF AGC
10
IF OUT +
Output 2 of the IF Amplifier
11
IF OUT -
Output 1 of the IF Amplifier
12
AIF Output
IF output of the Analog BroadBand
2. SAW FILTER – Audio – Epcos K9656M(Z101)
2.1. Standart
B/G
D/K
I
L/L’
Click on the first or last page to see other LC-22D12E service manuals if exist.