LC-22AD1E (serv.man25). LC22AD1E - Sharp TV User Guide / Operation Manual. Page 15

You can select channels using 0-9 or CH a/b.

• To handle the increasing number of channels available, this LCD TV set allows you

to select up to 200 channels (0 to 199).

Using CH a/b

Press CH a and the channels change in the order shown below:

1 

→ 2 → 3 → . . . → 198 → 199 → 0 → 1 → 2 → 3 → . . .

Press CH b and the channels change in the order shown below:

3 

→ 2 → 1 → 0 → 199 → 198 →  . . . → 3 → 2 → 1 → . . .

• Channel “0” is prepared for RF output of VCR.
• Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-

digit channel mode.

View a page directly which is 3-digit page number from 100 to 899 by pressing
buttons 0 to 9.

| Press ik to increase the sound volume. The

numerical value increases.

| Press il to decrease the sound volume. The

numerical value decreases.

| Press e (Mute) to temporarily turn off the sound.

“Sound off” is displayed.

| Press e (Mute) to turn off the Mute function.

“Sound on” is displayed.

• When Volume i (k/l) is pressed in the Mute mode,

the sound turns on and the volume indicator is displayed.

• The Mute function is cancelled when B is pressed.

 Volume                
  50

 Volume                
  10

Select the channels directly by pressing buttons 0 to 9.

When selecting the channel using 0 to 9, finish inputting the channel number by
holding down the button for the last digit for a moment.

a
To select a 1-digit channel (e.g. channel 2):
• Press the 2 button.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
• When you enter the channel, a 3-digit input underbar appears in digital TV mode

and a 2-digit in analogue TV mode.
Once you input a channel it is set after a few moments if there are no other
operations. Or press OK to set immediately after input.

(ik/l) CH s/r