Read Sharp LC-20SD4E (serv.man7) User Guide / Operation Manual online
13
Menu operations
Manual adjustment
You can set some channel items manually.
CH
1 3
ENT ER : S e t
: A d j u s t
MENU : R e t u r n
P A L
Sort
Channel positions can be sorted freely.
1
Repeat steps 1 to 3 in Programmes.
2
Press a/b to select “Sort”, and then press d.
3
Press a/b/c/d to select the channel you want
to move, and then press ENTER.
to move, and then press ENTER.
4
Press a/b/c/d to move it to the desired position,
and then press ENTER.
and then press ENTER.
• To cancel the sort, press MENU or EXIT.
5
Repeat steps 3 and 4 until all desired channels
are sorted.
are sorted.
6
Press EXIT.
Erase programme
An individual channel can be erased.
1
Repeat steps 1 to 3 in Programmes.
2
Press a/b to select “Erase programme”, and then
press d.
press d.
3
Press a/b/c/d to select the channel you want
to erase, and then press ENTER.
to erase, and then press ENTER.
• The selected channel is displayed in red.
4
Repeat step 3 until all desired channels are
erased.
erased.
5
Press EXIT.
First installation
You can run First Installation again, even after setting
up the preset channels.
up the preset channels.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “First installation”, and then
press d.
press d.
4
You can set language, country/area and Automatic
search the same as in the initial auto installation.
Follow steps 1 to 3 on page 7.
search the same as in the initial auto installation.
Follow steps 1 to 3 on page 7.
NOTE
• The initial auto installation can be stopped by pressing
MENU or EXIT.
1
Repeat steps 1 to 3 in Programmes.
2
Press a/b to select “Manual adjustment” and
then press d.
then press d.
3
Press c/d to select “PAL” or “SECAM-L”, and then
press ENTER.
press ENTER.
4
Press c/d to tune in a channel automatically.
• The auto search begins and it will stop at each
station that has a good enough reception. You can
fine tune the reception by pressing a/b.
fine tune the reception by pressing a/b.
5
Press ENTER.
6
Press a/b to select a channel number to store,
and then press ENTER.
and then press ENTER.
7
Repeat steps 3 to 6 until all desired channels are
stored.
stored.
8
Press EXIT.
NOTE
• Adjust while checking the background picture as a
reference.
Click on the first or last page to see other LC-20SD4E (serv.man7) service manuals if exist.