Read Sharp LC-20B6E (serv.man27) User Guide / Operation Manual online
11
● Press (MAIN POWER).
• The STANDBY/ON indicator instantly changes from red to
green and the LCD TV set is turned on.
• The on-screen display appears for a few seconds after turning
on the main power.
● To turn off the main power, press (MAIN POWER)
again.
STANDBY/ON
To turn off the LCD TV
Press
B
B
B
B
B.
• The STANDBY/ON indicator will turn red.
To turn the LCD TV back on
Press
B
B
B
B
B again.
• The STANDBY/ON indicator will turn green.
Turning On and Off the Main Power
STANDBY/ON indicator
1 S 0 6
On-screen display
(MAIN POWER)
Basic Operation
Switching the Input Modes (AV1/AV2/COMPONENT/PC/FM Radio/TV)
Turn on the power of the connected devices.
Press INPUT to select the applicable input source.
• The screen changes in order of AV1, AV2, PC, FM Radio
and TV mode each time INPUT is pressed.
• You can enter the FM Radio mode directly by pressing
RADIO. Press the button again to exit.
NOTE
• AV1:
Select this mode when viewing the signals from the
video equipment connected to the AV-IN1 terminal or to
the COMPONENT input terminals.
When viewing the signals from the COMPONENT input
terminals, set “Terminal select” to “COMPONENT” and
connect the audio output to the AV-IN1 (21-pin Euro-
SCART (RGB)) terminal.
See page 25 for more details.
video equipment connected to the AV-IN1 terminal or to
the COMPONENT input terminals.
When viewing the signals from the COMPONENT input
terminals, set “Terminal select” to “COMPONENT” and
connect the audio output to the AV-IN1 (21-pin Euro-
SCART (RGB)) terminal.
See page 25 for more details.
• AV2:
Select this mode when viewing the signals from the
video equipment connected to the AV-IN2 terminals
using the VIDEO or S-VIDEO terminal for video input.
If both VIDEO and S-VIDEO terminals are connected
with cables, the S-VIDEO input terminal is selected as
the high priority.
video equipment connected to the AV-IN2 terminals
using the VIDEO or S-VIDEO terminal for video input.
If both VIDEO and S-VIDEO terminals are connected
with cables, the S-VIDEO input terminal is selected as
the high priority.
• PC:
Select this mode when viewing the signals from the PC
connected to the PC-IN terminal.
connected to the PC-IN terminal.
• FM Radio: Select this mode when listening to the FM radio using the FM
antenna terminal for FM radio signal input.
In this mode, an image cannot be displayed on the screen.
In this mode, an image cannot be displayed on the screen.
2
1
A V 2
P C
A V 1
C O M P O N E N T 4 8 0 P
F M 2 0
1 S 0 6
AV2 mode
PC mode
TV mode
FM Radio mode
AV1 (SCART) mode
AV1 (COMPONENT) mode
or
LC-20B6E_E_P11-14.p65
04.6.11, 5:54 PM
11
Click on the first or last page to see other LC-20B6E (serv.man27) service manuals if exist.