LC-20AD5E (serv.man2) - Sharp TV User Guide / Operation Manual. Page 10

Read Sharp LC-20AD5E (serv.man2) User Guide / Operation Manual online

GB 
-8
Turning on the power
Press   on the TV.
The   indicator on the TV changes from red to green.
Standby mode
Press   on the remote control unit when the TV is on.
The TV enters standby mode and the image on the 
screen disappears.
The   indicator on the TV changes from green to red.
You can turn the TV on by pressing   on the remote 
control unit from standby mode.
Weak electric power is still consumed even when   is 
turned off.
To completely turn off the TV, press   on the TV.
Display status indicator
Off
Power off
Red
The TV is in standby mode.
Green
The TV is on.
Orange
The TV screen is off and a Timer event 
has begun.
NOTE
If you are not going to use this TV for a long period of 
time, be sure to remove the AC cord from the power 
outlet.
In DTV input mode, if the power is turned off immediately 
after a setting change from the menu screen, the new 
setting or channel information may not be memorised.
Initial auto installation
When the TV powers on for the first time after 
purchase, the initial auto installation is invoked. 
You can automatically set language, country and 
channels in successive operations.
NOTE
The initial auto installation functions only once. If the 
initial auto installation is not completed, (ex: When the 
power shut down, etc.), try First Installation from the 
Setup menu. (See page 14.)
The initial auto installation can be stopped by pressing 
MENU
 or END
Setting the on-screen display language
 Press 
▲/▼/◀/▶ to select the desired language 
listed from “First installation (Language)”.
 Press OK to enter the setting.
2
Setting your country or area
Press 
◀/▶ to select your country or area listed from 
“First installation (Country)”.
You can change “Colour system” and “Sound 
system” only when “Other count.” is selected in 
“Country”.
3
Setting the Automatic search
 Press 
▲/▼ to select “Start search”.
 Press OK to enter the setting.
The programme auto search starts at the same 
time.
You do not need to do anything during the auto 
search.
The setup menu disappears and you can watch the 
programme on channel 1.
NOTE
With “Automatic search” of “First installation”, digital 
broadcasts are scanned after scanning analogue 
broadcasts. If you want to operate the digital mode 
first, press END and then press DTV/TV. Follow the 
procedures in “Installation” on page 23.
You can select a language from the Setup menu. Select 
from 13 languages. (English, Spanish, German, French, 
Italian, Swedish, Dutch, Russian, Portuguese, Turkish, 
Greek, Finnish, Polish)
You can select a country from the Setup menu. Select 
from 16 countries. (Austria, Belgium, France, Germany, 
Netherlands, Italy, Spain, Switzerland, UK, Poland, 
Russia, Czech Republic, Hungary, Slovenia, Sweden, 
Other country)
If you want to reconfigure the country setting, for 
instance after moving to another country, conduct “First 
installation” from the Analogue Menu again.
If you select the country as “Germany” in the 
“First installation” of the Setup menu, the 
tuner works as follows.
After “Auto Scan” is complete, carrier names are sorted 
in the same order of the “Channel Sort Table List (TV, 
Radio)”.
Sorting is accomplished by checking whether the 
service name correspond to the “Received Service 
Name” of the “Channel Sort Table List”.
Received carrier names are not changed to match the 
“Short Service Name”.
The channel position moves up, if the service is not 
found after the “Auto Scan” is finished.
A carrier that is not in the “Channel Sort Table List” will 
be positioned at the bottom of the sorted list.
If the same service name is duplicated, the tuner selects 
the stronger signal, sorts it and places it in the list. The 
weaker signal listing is placed at the bottom of the list.
TV and Radio presetting is done separately so LCN 
numbers are not duplicated between the two.
If you select the Country as “Sweden” in the 
“First installation” of the Setup menu, tuner 
works as follows
When there is a Channel List in the data after Auto Scan, 
Channel Type Selection Menu will be displayed and 
available to set Channel List Type.
Select the Channel List Type by pressing 
◀/▶ and press 
OK.
Quick guide
TV (Front view)
Remote control sensor
 
(Standby/On) indicator
Page of 39
Display

Click on the first or last page to see other LC-20AD5E (serv.man2) service manuals if exist.