Read Sharp LC-20AD5E (serv.man2) User Guide / Operation Manual online
GB
-23
Installation
This section describes how to reconfigure the DTV
settings after conducting Initial auto installation on
page 8.
Auto Scan
The TV automatically detects and stores all available
services in your area.
Press ◀/▶ to select “Installation”.
2
Press ▲/▼ to select “Auto Scan”, and then press
OK.
A confirmation message displays.
•
3
Press ◀/▶ to select “Yes”, and then press OK.
The TV starts scanning all available DTV and radio
services in your area.
•
NOTE
To cancel the scan in progress, press END.
Manual Scan
Manually add a new carrier by entering the desired
carrier number or frequency band.
Press ◀/▶ to select “Installation”.
2
Press ▲/▼ to select “Manual Scan”, and then
press OK.
Manual Scan
Channel list
Ch-5
Frequency (kHz)
177500
0..9
Navigate
OK
END
3
Press ▲/▼ to select “Channel list”, then ◀/▶ to
enter the carrier number, and then press OK.
The frequency of the selected carrier in the below
cell changes correspondingly.
•
4
After the scan is complete, the screen shows all
available services for the selected range.
A confirmation message displays.
•
5
Press ◀/▶ to select “Yes”, and then press OK.
NOTE
If “Sweden” is selected on the “First installation
(Country)” screen, the “Frequency (kHz)” cannot be
used.
When the Country is set to Sweden in the “First
installation (Country)”
When there is a Channel List in the data after Auto
Scan or Manual Scan, Channel Type Selection Menu
will be displayed and available to set Channel List
Type.
Select the Channel List Type by pressing
◀/▶ and
press OK.
•
•
Move
Sort the order of the selected service by moving the
service position.
Press ▲/▼ to select the desired service.
2
Press 7 on the remote control. An icon displays
indicating the service to be moved.
Pressing
7 will turn the move icon on and off.
•
3
Move the selected service to the desired position
using ▲/▼, and then press OK to register the
change.
Move To
Sort the order of the selected service by modifying
the service number.
Press ▲/▼ to select the desired service.
2
Press 8 on the remote control. Now you can
change the service number on the left side of the
screen.
3
Enter the number using 0 - 9 numeric buttons,
and then press OK. The service moves to the
new position.
NOTE
If on the “First installation (Country)” screen “UK” is
selected, “Move To” cannot be used in U.K.
View
Change to the service shown in the picture window.
Press ▲/▼ to select the desired service.
2
Press OK on the remote control.
The image shown in the picture window changes.
•
3
Press END to exit the Channel Organizer screen
to view the image in full screen.
•
DTV menu operations
Click on the first or last page to see other LC-20AD5E (serv.man2) service manuals if exist.