Read Sharp LC-17SH1E (serv.man5) User Guide / Operation Manual online
18
Manual Tuning
How to tune a station to channel 2 position.
1. Select MANUAL ADJUSTMENT. Then press
.
2. Press
or
until the picture appears on screen. If this is
not your desired channel, press
or
until your desired
channel appears. If you need to make the picture clearer,
use
use
or
(FINE TUNING). Then press OK.
3. Press
or
to select channel position No.2, then press
OK.
4. Repeat steps 2 through 3 until all the required channels have been stored.
5. When all desired channels have been set in your required position, press MENU three times to
return to normal TV screen.
+0
: F.TUNE
: SET
OK
: SEARCH
: RETURN
MENU
+0
: SELECT
: RETURN
MENU
: SET
OK
Presetting the Channels
Channel
Position
Station
1
BBC 1
2
BBC 2
3
ITV
4
Channel 4
5
Channel 5
6
Satellite/Cable
(if available)
Note:
It is recommended that you store the stations you tune in the order shown in the table below.
If you have your Satellite/Cable, etc. connected via a SCART lead to this TV, then press
It is recommended that you store the stations you tune in the order shown in the table below.
If you have your Satellite/Cable, etc. connected via a SCART lead to this TV, then press
(INPUT) to
select it, rather than tuning it in to channel 6.
This will produce a clearer picture and stereo sound if available.
This will produce a clearer picture and stereo sound if available.
3U40101A P15-23
4/25/05, 11:32 AM
18
Click on the first or last page to see other LC-17SH1E (serv.man5) service manuals if exist.