Read Sharp LC-15B4E (serv.man4) Service Manual online
5
LC-13B4E
LC-15B4E
LC-15B4E
OPERATION MANUAL
Part Names of Main Unit
Controls
Note:
•
TV/VIDEO
,
CH(
)/(
),
Volume (–)/(+)
and
MENU
on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
CH
MENU
TV/VIDEO
Volume (–)/(+)
POWER/STANDBY
indicator
A green indicator lights when the power is on and a red
indicator lights when in the standby mode (the indicator will
not light when the main power is off).
Remote sensor window
Remote sensor indicator
A red indicator blinks when the TV set receives the
remote control signal.
Upper control panel
CH (
)/(
)
MENU
TV/VIDEO
(MAIN POWER)
Speaker
To change the vertical angle of
the LCD TV set, tilt the screen
up to 5 degrees forward or 10
degrees backward. The TV set
can also be rotated 25 degrees
to right and left. Please adjust
the angle so that the TV set can
be watched most comfortably.
Speaker
Terminals
Tilt the displa
y b
y
grabbing onto
the carr
ying handle while securely
holding do
wn the stand with y
our
other hand.
Ho
w to adjust the angle
L
R
A
V-
IN
1
R
G
B
A
V
-IN
2
S
-V
ID
EO
VID
E
O
L
R
A
U
DIO
P
O
W
E
R
IN
PUT
DC
1
2
V
Carrying handle
L
R
A
U
D
IO
O
U
T
A
V
-I
N
1
R
G
B
A
V
-I
N
2
S
-V
ID
E
O
V
ID
E
O
L
R
A
U
D
IO
P
O
W
ER
IN
P
U
T
D
C
12
V
POWER INPUT DC12V
AV-IN 1
(21pin Euro-SCART)
S-VIDEO
VIDEO
AUDIO (L
)
AUDIO (R)
AV-IN 2
Antenna
AUDIO OUT (L)
AUDIO OUT (R)
Headphones
Rear View
6
LC-13B4E
LC-15B4E
LC-15B4E
Part Names of Remote Control
CH
MENU
E
TV/VIDEO
RE
VE
A
L
HOLD
E
ND
M
MENU
SOUND
S
UB
TIT
LE
SUBPAGE
TEXT
R
OTAT
E
WIDE
T
CH
OK
E
TV/VIDEO
RE
VE
A
L
HOLD
E
ND
MENU
SOUND
S
UB
TIT
LE
SUBPAGE
TEXT
R
OTAT
E
BRIGHT
T
M
T
OK, Programme Table
SUBTITLE
Displays the Teletext
Subtitle directly.
HOLD
Temporarily holds the
current Teletext page.
(Mute)
Switches the sound on and off.
Yellow,
Timer function Menu
Cyan, Status Display
Turns on the status display
when the menu is not
displayed.
TV/VIDEO
Switches the input source
between AV1, AV2 and
TV mode.
Channel Select
MENU
Displays the
TV menu.
Volume (+)/(
-
)
(Flashback)
Returns to the previous
channel.
Red, Picture Menu
Upwards
/Downwards
Selection, zoom display
function
(Teletext mode)
END
Returns to normal screen.
TEXT
Displays the
T
e
letext mode
screen.
(Power)
SOUND
Switches the sound
mode.
REVEAL
Displays hidden information
such as solutions to riddles
and puzzles.
Right
/ Left Selection
SUBPAGE
Displays the
T
e
letext
Subpage directly.
ROTATE
Rotates the display in every
direction.
BRIGHT
Selects the brightness
of the display.
Green, Sound Menu
CH (
)/(
)
Displays previous/next page.
(Teletext mode)
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two R-03 (“AAA” size, UM/SUM-4) batteries supplied in the remote
control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new R-03
(“AAA” size, UM/SUM-4) batteries.
1
Open the battery cover.
2
Insert two R-03 (“AAA” size,
UM/SUM-4) batteries.
3
Replace the battery cover.
Position the positive and
negative ends of the
batteries as indicated in
the compartment.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
•
Place batteries with their terminals corresponding to the (+) and (–) indications.
•
Different types of batteries have different characteristics.
Do not mix batteries of different types.
•
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
•
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
•
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
•
If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
Engaging the lower
claw with the remote
control, close the
cover.
Slide the cover while
pressing the (
) part.
Display
