Read Sharp LC-15A2E (serv.man2) Service Manual online
LC-15A2E
6
DISASSEMBLY OF THE SET
1. Insert your finger into the center of the terminal cover
and pull it toward you to detach the terminal cover.
Remove the screws installing a stand.
Remove the screws installing a stand.
2. Remove the four screws
1
and one screw
2
.
3. Open the cabinet B by approx. 45˚ from the bottom
of the cabinet (stand side).
4. Remove the lead wire from the cable clamp
3
.
5. Remove the power connector
4
.
6. Remove the connector
5
from the light reception
unit.
7. Remove the lead wire from the cable clamp
6
.
8. Remove the speaker connector
7
.
9. Remove the FFC from the FFC connector
8
on the
main PWB.
10. Remove the connector
9
from the switch PWB.
11. Remove the right and left speaker connectors
0
on the terminal PWB.
<<Disassembly of the main PWB>>
1. Disconnect the flexible cable connectors
1. Disconnect the flexible cable connectors
q
and
w
from the LCD panel.
2. Disconnect the cable connectors
e
and
r
from
the fluorescent lamp.
3. Remove the four screws
t
.
<<Disassembly of the terminal PWB>>
1. Remove the five screws
1. Remove the five screws
y
.
2. Remove the two screws
i
. Remove the cover
u
.
Take them out of the cabinet holes.
<<Cabinet A side>>
<<Cabinet B side>>
Cabinet A CCABA2402CE03
Terminal Cover GCOVA1922CEKA
Hinge Cover GCOVA1853CESA
Rotation Cover GCOVA1854CESA
Rotation Cover GCOVA1854CESA
Cabinet B CCABB2298CE01
Click on the first or last page to see other LC-15A2E (serv.man2) service manuals if exist.