Read Sharp LC-13S1E (serv.man27) User Guide / Operation Manual online
8
12
°
35°
Part Names of Main Unit
Controls
A
Note:
• TV/VIDEO, CH (
)/(
) i (–)/(+) (Volume) and MENU on the main unit have the same functions as the same buttons on the remote
control. Fundamentally, this operation manual provides a description based on operation using the remote control.
Headphone jack
Plug the headphone mini-plug into the Headphone jack located on
the front of the TV set.
the front of the TV set.
OPC sensor
Remote sensor
OPC sensor indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green when the
Brightness is set to Auto. (See pages 21 and 22.)
Brightness is set to Auto. (See pages 21 and 22.)
POWER/STANDBY/Remote sensor indicator
A green indicator lights when the power is on and a red indicator
lights when in the standby mode (the indicator will not light when the
main power is off). A red indicator blinks when the TV set receives
the remote control signal.
lights when in the standby mode (the indicator will not light when the
main power is off). A red indicator blinks when the TV set receives
the remote control signal.
* The examples used throughout this manual are based
on the LC-15S1E model.
i (–)/(+) (Volume)
Upper control panel
CH (
)/(
)
MENU
TV/VIDEO
X (MAIN POWER)
The screen can be adjusted
backwards to an angle between
12 degrees and 35 degrees.
The screen cannot be set up
straight. When changing the
angle, make sure to hold the
stand and adjust the screen to
the best viewable angle.
backwards to an angle between
12 degrees and 35 degrees.
The screen cannot be set up
straight. When changing the
angle, make sure to hold the
stand and adjust the screen to
the best viewable angle.
Speaker
Adjustable range
LC-13/15S1E(E)-01-10
03.7.17, 0:10 PM
8
Click on the first or last page to see other LC-13S1E (serv.man27) service manuals if exist.