AN-3DG20 (serv.man2) - Sharp TV User Guide / Operation Manual. Page 5

When viewing 3D images, you can slide the switch 
between 2D and 3D modes. This is useful when several 
people are viewing 3D images on the same TV with 
some people wanting to watch in 3D and some people 
wanting to watch in 2D.

■

When you slide the switch to 2D while viewing 3D 
images, the 3D images switch to 2D images.

■

When you slide the switch to 3D while viewing 2D 
images, the 2D images switch to 3D images.

The 3D Glasses can be used by receiving an infrared 
signal sent from the TV.
The 3D Glasses turn off automatically after 10 minutes if 
no signal is received from the TV.

■

From directly in front of the 3D infrared emitter on 
the TV: approx. 5 m (within approx. 30° horizontally 
and 20° vertically)

When the battery power is low, the LED light blinks one 
time per second. If the 3D glasses battery runs out, you 
can recharge the 3D glasses battery by connecting the 
supplied USB cable to the TV and the power-supply 
terminal on the 3D glasses.

 

Turn off the TV, and then slide the switch on the 
3D glasses to OFF.

 

Connect the cable shown below before turning 
on the TV.
•  The LED light blinks once per two seconds, and 

then starts recharging.

•  When the LED light goes off, the recharge is 

complete. It takes 90 minutes to complete the 
recharge.

•  Insert the USB cable again if the LED light blinks 

on and off once every 0.5 seconds. If it still 
doesn’t respond, inquire with a retail dealer or 
SHARP customer service. 

 

After the recharge has completed, turn off the 
TV, and then remove the USB cable from the 3D 
glasses.

 

1 USB cable (supplied accessory)

 

2 Power-supply terminal

•  Do not recharge while wearing the 3D glasses.

•  Be sure to turn on the TV when you recharge the 3D 

glasses battery. If the TV is turned off, you may not 
recharge it.

•  When you recharge the 3D glasses battery, only 

connect the USB cable (supplied accessory) to the 
USB terminal on the TV.

•  The battery will not recharge during usage with the 

USB cable connected. 

•  Recharge the battery within the operating temperature 

(10°C–40°C). The battery may not be able to recharge 
outside of the operating temperature.

You can use the 3D glasses with an external power 
supply when you slide the switch on the 3D glasses 
to 3D or 2D in step 1 in Recharging the 3D glasses 
battery

 (recharging will not complete).

•  Do not move around while wearing the 3D glasses. 

You may result in getting your feet caught in USB 
cable, the TV falling or other accidents that may cause 
injury.

•  When you use the USB cable connecting the 3D 

glasses, careful not to get your feet caught in the USB 
cable. It may result in falling or other accidents that 
may cause injury.

AN-3DG20_EN_EU.indd   5

AN-3DG20_EN_EU.indd   5

2011/03/03   10:45:29

2011/03/03   10:45:29