Read Sharp 76GF-64H (serv.man8) User Guide / Operation Manual online
8
Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. Put batteries into the remote control and connect the aerial lead into the aerial input terminal on the rear of your TV,
1. Put batteries into the remote control and connect the aerial lead into the aerial input terminal on the rear of your TV,
as shown on page 3 and 4.
2. Connect the TV power cable to a 220 ~ 240 V system.
3. Press the main power button (
I
), on the right hand side of the TV
set, to start the “AUTO INSTALLATION”.
4. The red power indicator will light.
5. The “AUTO INSTALLATION” message will appear on your TV
screen.
•
The TV is ready to preset automatically all local channels for you.
•
If the TV is being used with a VCR, turn on the VCR and play back
a pre-recorded tape.
a pre-recorded tape.
6. Now, press any button on the TV remote control and follow the
instructions on the screen, to start Auto Channel Preset.
TV set will sort channels in order, with:
1= BBC 1
2= BBC 2
3= ITV and so on.
TV set will sort channels in order, with:
1= BBC 1
2= BBC 2
3= ITV and so on.
Automatic Channel Sorting System (ACSS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
Notes: This tuning process may take several minutes to perform.
If you need to repeat the “AUTO INSTALLATION”, please read -TV
Channel Setting- (page 31).
If you need to repeat the “AUTO INSTALLATION”, please read -TV
Channel Setting- (page 31).
Stored programmes: When the AUTOMATIC SEARCH has been
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name.
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name.
For a more detailed explanation see page 9.
If you wish exit from the menu, press the BLUE button.
If you wish exit from the menu, press the BLUE button.
Note
:
It is advisable to use Pr 01, Pr 02, Pr 03 and Pr 04 for the most often used
programmes with teletext and for those which contain their own programme
information and information on other channels in the Teletext pages. For more
explanation, please go on to the section entitled TV-GUIDE.
information and information on other channels in the Teletext pages. For more
explanation, please go on to the section entitled TV-GUIDE.
Auto Installation
VCR
Automatic searching and sorting.
Press the menu button to cancel.
Press the menu button to cancel.
Main power button
Power indicator
Web-site: www.sharp.co.uk/support
Help Line (office hours only): 08705 274277
Click on the first or last page to see other 76GF-64H (serv.man8) service manuals if exist.