66GS-62 (serv.man13). part 1 (p.1-10) - Sharp TV User Guide / Operation Manual. Page 8

Read Sharp 66GS-62 (serv.man13) User Guide / Operation Manual online

7
Auto Installation System
Your television set is provided with an Automatic Installation System
which makes installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. 
Connect the antenna jack in the antenna input terminal on the rear side
of your TV-set. Then connect the TV power cable to a 220 ~ 240V a.c.
system.
2. Press the main power button (
®), on the right hand side of the TV set,
and the AUTO INSTALLATION message will appear on the screen.
3. Put batteries into the remote control and follow the instructions on
the screen.
The TV will go through the following steps Automatically and sequentially:
Automatic Channel Sorting System (ASS): The TV set SEARCHES FOR
FREQUENCIES, memorises the channels found, and sorts them (accor-
ding to technical criteria) from Pr-01 of the TV, to a maximum of 99 pro-
grammes.
This tuning system may take several minutes to perform.
Editing: When the AUTOMATIC SEARCH has been completed, the list of
memorised programmes appears. In this menu, you can change the order
of the channels and change or give the channels a four letter name.
NOTE: You may not have to follow this procedure if it has already been
done for you at the establishment where you purchased your TV. If this is
the case, please go on to the section entitled «Switching ON» (page 9).
If you need to repeat the AUTO INSTALLATION, read on.
TO REPEAT THE AUTO INSTALLATION
1. 
Press the MENU button 
 to see the Main Menu.
2. Press the BLUE button 
to see the «TUNING Menu».
3. Press the Cursor UP button 
to select AUTO-TUNE.
4. Press the MENU button 
 to start the AUTO INSTALLATION.
Stored programmes
When the TV has finished the automatic search, the «Stored
programmes» menu will appear on screen with a list of the channels
which have been memorised with the available options:
a) Select programme to be edited 
/
b) Edit this program 
 Red button 
c) Go to sorting mode 
 Green buton 
d) Delete this program 
 Yellow button 
e) Exit this menu 
 Blue button 
With these options, you will be able to organise the real channels (CH **)
memorised in the TV programmes (Pr 01 … Pr 99) and put them into your
own preferred order.
The following is a detailed explanation of options a), b),c), d) and e), on
page 8.
CH
CH
CH
Auto Installation
Pr 01
CH21 BBC1
Pr 02
CH31 BBC2
Pr 03
CH41 ITV
Pr 04
CH51 CH4
Pr 05
CH61 CNN
Pr 06
––––
––––
Pr 07
––––
––––
Pr 08
––––
––––
Pr 09
––––
––––
Pr 10
––––
––––
Stored programmes:
 Edit this program
 Go to sorting mode
 Delete this program
 Exit this menu
Be sure the antenna cable ...
Press any button in
the handset to start.
Searching,
please wait.
Pr 01
01 %
SHARP
AUTO INSTALLATION
(red)
(green)
(yellow)
(blue)
Power Indicator
Main power button
1., 4.
3.
2.
Page of 11
Display

Click on the first or last page to see other 66GS-62 (serv.man13) service manuals if exist.