66GF-63 (serv.man13) - Sharp TV User Guide / Operation Manual. Page 9

8

Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.

Procedure:
1. Put batteries into the remote control and connect the aerial lead into the aerial input terminal on the rear of your TV,

as shown on page 3 and 4.

2. Connect the TV power cable to a 220 ~ 240 V system.

3. Press the main power button (

I

), on the right hand side of the TV

set, to start the “AUTO INSTALLATION”.

4. The red power indicator will light.

5. The “AUTO INSTALLATION” message will appear on your TV

screen.

•

The TV is ready to preset automatically all local channels for you.

•

If the TV is being used with a VCR, turn on the VCR and play back
a pre-recorded tape.

6. Now, press any button on the TV remote control and follow the

instructions on the screen, to start Auto Channel Preset.
TV set will sort channels in order, with:
1= BBC 1
2= BBC 2
3= ITV and so on.

Automatic Channel Sorting System (ACSS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.

Notes: This tuning process may take several minutes to perform.
IF THE TV CANNOT BE INSTALLED BY THIS METHOD, PLEASE
PHONE THE FOLLOWING NUMBER: 

If you need to repeat the “AUTO INSTALLATION”, please read -TV
Channel Setting- (page 28).

Stored programmes: When the AUTOMATIC SEARCH has been
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name.

For a more detailed explanation see page 9.
If you wish exit from the menu, press the BLUE button.

Automatic searching and sorting.
Press the menu button to cancel.

Main power button

Power indicator