66FW-54H (serv.man12) - Sharp TV User Guide / Operation Manual. Page 10

Read Sharp 66FW-54H (serv.man12) User Guide / Operation Manual online

9
Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1. 
Put batteries into the remote control and connect the antenna jack into the antenna input terminal on the rear of your
TV, as shown on page 4 and 5.
2. Connect the TV power cable to a 220 ~ 240 V system.
3. Press the main power button (
I
), on the right hand side of the TV
set, to start the “AUTO INSTALLATION”.
4. The red power indicator will light.
5. The “AUTO INSTALLATION” message will appear on your TV
screen.
The TV is ready to preset automatically all local channels for you.
If the TV is being used with a VCR, turn on the VCR and play back
a pre-recorded tape.
6. Now, press any button on the TV remote control and follow the
instructions on the screen, to start Auto Channel Preset.
Automatic Channel Sorting System (ACSS): The TV set SEARCHES
FOR FREQUENCIES, memorises the channels found, and sorts them
(according to technical criteria) from Pr-01 of the TV, to a maximum of
99 programmes.
Notes: This tuning process may take several minutes to perform.
IF THE TV CANNOT BE INSTALLED BY THIS METHOD, PLEASE
PHONE THE FOLLOWING NUMBER: 
0990-274277
If you need to repeat the “AUTO INSTALLATION”, please read -TV
Channel Setting- (page 32).
Stored programmes: When the AUTOMATIC SEARCH has been
completed, the "Stored programmes" Menu will appear on screen and
you can change the order of the channels and change or give the
channels a four letter name with the available options:
a) Select programme to be edited.
b) Delete this programme.
c) Go to sorting mode.
d) Edit this programme.
e) Exit.
For a more detailed explanation see page 10.
If you wish exit from the menu, press the BLUE button.
Note
It is advisable to use Pr 01, Pr 02, Pr 03 and Pr 04 for the most often used
programmes with teletext and for those which contain their own programme
information and information on other channels in the Teletext pages. For more
explanation, please go on to the section entitled TV-GUIDE.
Power indicator
Main power button
CH
Auto Installation
VCR
Automatic searching and sorting.
Press the menu button to cancel.
Page of 52
Display

Click on the first or last page to see other 66FW-54H (serv.man12) service manuals if exist.